A guitar's frets, fretboard, tuners, headstock, and truss rod, all attached to a long wooden extension, collectively constitute its neck. The wood used to make the fretboard usually differs from the wood in the rest of the neck. The bending stress on the neck is considerable, particularly when heavier gauge strings are used (see Tuning), and the ability of the neck to resist bending (see Truss rod) is important to the guitar's ability to hold a constant pitch during tuning or when strings are fretted. The rigidity of the neck with respect to the body of the guitar is one determinant of a good instrument versus a poor-quality one.
I would especially like to stress the gentle approach Justin takes with two key aspects that contributed to my development as a musician - music theory and ear training. Justin has succeeded in conveying the importance and profoundness of understanding music both theoretically and through your ears while maintaining a simple and accessible approach to them, all while sticking to what is ultimately the most important motto: 'If it sounds good, it is good'.
Entire contents Copyright © Musician's Friend Inc. Musician's Friend is a registered trademark of Musician's Friend Inc. All Rights Reserved. Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer's specifications or changes, or grammatical inaccuracies in any product included in the Musician's Friend catalog or website. Prices subject to change without notice.

A guitar strap is a strip of material with an attachment mechanism on each end, made to hold a guitar via the shoulders at an adjustable length. Guitars have varying accommodations for attaching a strap. The most common are strap buttons, also called strap pins, which are flanged steel posts anchored to the guitar with screws. Two strap buttons come pre-attached to virtually all electric guitars, and many steel-string acoustic guitars. Strap buttons are sometimes replaced with "strap locks", which connect the guitar to the strap more securely.
Peterson, Jonathon (2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72 (Winter): 36–43. ISSN 1041-7176. Archived from the original on 21 October 2011. Retrieved 9 October 2012.
Dots are usually inlaid into the upper edge of the fretboard in the same positions, small enough to be visible only to the player. These usually appear on the odd numbered frets, but also on the 12th fret (the one octave mark) instead of the 11th and 13th frets. Some older or high-end instruments have inlays made of mother of pearl, abalone, ivory, colored wood or other exotic materials and designs. Simpler inlays are often made of plastic or painted. High-end classical guitars seldom have fretboard inlays as a well-trained player is expected to know his or her way around the instrument. In addition to fretboard inlay, the headstock and soundhole surround are also frequently inlaid. The manufacturer's logo or a small design is often inlaid into the headstock. Rosette designs vary from simple concentric circles to delicate fretwork mimicking the historic rosette of lutes. Bindings that edge the finger and sound boards are sometimes inlaid. Some instruments have a filler strip running down the length and behind the neck, used for strength or to fill the cavity through which the truss rod was installed in the neck.
Learning guitar is a lot easier when you have a step-by-step system to follow. Guitar Tricks lessons are interconnected and organized to get slightly harder as you progress. You watch a video lesson, play along, and then click a “Next” button to go to the next lesson. Lessons have multiple camera angles, guitar tabs, jam tracks and everything else you need to learn.
Am Strut Solo 1 is a free guitar lesson that will teach you how to play a blues solo over our original Am Strut jam track. Peter Vogl will show you how to use the Am pentatonic scale in the open position, the A natural minor scale, and some outside notes to create a solo. We’ll use hammer-ons, slides, and our right hand to create a more expressive solo. Specifically, we’ll use the thumb instead of a pick to play the strings and add a plucky and funky vibe. Peter will start by walking you through the theory choices and how to play the solo in detail. Next, we’ll practice the whole solo at a reduced speed with a metronome before advancing to playing along with the track. Sign up for a free 7 day trial and access a PDF of the tabs, a downloadable mp3 jam track, and three more solos over this progression.
   Hello! My name is Jacob and I am a musician in the Boston area. I began playing guitar when I was seven and piano when I was nine. My father was a Berklee College of Music student and my mother sang in the Lexington pops, and so ever since I was young I knew that music was something I wanted to make a career out of. I would practice my instruments for hours each day, and started writing my own songs.    &nb...
MIDI converters use a hexaphonic guitar signal to determine pitch, duration, attack, and decay characteristics. The MIDI sends the note information to an internal or external sound bank device. The resulting sound closely mimics numerous instruments. The MIDI setup can also let the guitar be used as a game controller (i.e., Rock Band Squier) or as an instructional tool, as with the Fretlight Guitar.

The acoustic bass guitar is a bass instrument with a hollow wooden body similar to, though usually somewhat larger than, that of a 6-string acoustic guitar. Like the traditional electric bass guitar and the double bass, the acoustic bass guitar commonly has four strings, which are normally tuned E-A-D-G, an octave below the lowest four strings of the 6-string guitar, which is the same tuning pitch as an electric bass guitar. It can, more rarely, be found with 5 or 6 strings, which provides a wider range of notes to be played with less movement up and down the neck.
When you play a guitar, bass, ukulele, mandolin or any other instrument in this big family, it's the vibration of the strings that creates your sound. That's common knowledge, of course, but have you ever stopped to really think about the implications? It's all too easy to dismiss your strings as just another part of your instrument, but the truth is they're more like its heart - and since playing the instrument means touching its strings, they also have a huge impact on the way it feels to play. With all that in mind, it's easy to see why the choice of strings is such an important one: it can make a massive difference in every aspect of your instrument, especially playability and tone. Picking out a new set of strings involves a number of choices, and those will depend on the specific instrument, so don't forget to filter the lineup by selecting a category. In most cases, that'll leave you with an easy-to-browse range of options - although if you're a guitarist or bassist, you'll still have hundreds to look at... and it might take a little more filtering to narrow things down further. Choosing your gauges will go a long way, not to mention material, which ranges from nylon for classical guitars to phosphor-bronze in acoustics and steel, nickel or even cobalt for electric guitars. Another aspect of strings to consider in your decision is coating. Traditional coated strings have a smoother feel than their uncoated cousins and usually last much longer, but they're also wider and that can make them sound different. If you like the idea of coated strings, but don't want to give up the tone you get with uncoated ones, then check out Elixir and Cleartone strings: these two manufacturers have mastered the art of ultra-thin, "barely-there" coatings that behave more like traditional strings. We've only just scratched the surface of what's available in this section, and there's a lot to see no matter what instrument you play. Different materials and gauges, coated or uncoated - it's up to you. You can buy your strings one at a time, go for a set or even stock up with multiple sets of strings at once. Still not sure where to begin? Try starting with the top-selling and best-rated strings and go from there. Finding the perfect set will probably take some experimentation, but there's no better guide than other musicians to get you on the right track.
Phosphor bronze strings have a warmer sound with a smooth (if somewhat understated) high end response. This makes them a great fit for genres that benefit from a mellower tone, like a lot of folk or finger-style work. These strings pair well with smaller bodied guitars, though many musicians who play more relaxed genres prefer these strings on larger bodied instruments as well.
Also, while coated strings do last longer than non-coated strings they’re also significantly more expensive. Personally, I find that coated strings last roughly twice as long as non-coated alternatives. Since they’re also about twice as expensive, I personally don’t save any money using coated strings. However, depending on how acidic your sweat is your experience may vary.

Jump up ^ This sequence of fifths features the diminished fifth (b,f), which replaces the perfect fifth (b,f♯) containing the chromatic note f♯, which is not a member of the C-major key. The note f (of the C-major scale) is replaced by the note f♯ in the Lydian chromatic scale (Russell, "The fundamental harmonic structure of the Lydian scale", Example 1:7, "The C Lydian scale", p. 5).

Picks come in many shapes and sizes. Picks vary from the small jazz pick to the large bass pick. The thickness of the pick often determines its use. A thinner pick (between 0.2 and 0.5 mm) is usually used for strumming or rhythm playing, whereas thicker picks (between 0.7 and 1.5+ mm) are usually used for single-note lines or lead playing. The distinctive guitar sound of Billy Gibbons is attributed to using a quarter or peso as a pick. Similarly, Brian May is known to use a sixpence coin as a pick, while noted 1970s and early 1980s session musician David Persons is known for using old credit cards, cut to the correct size, as plectrums.

The pickguard, also known as the scratchplate, is usually a piece of laminated plastic or other material that protects the finish of the top of the guitar from damage due to the use of a plectrum ("pick") or fingernails. Electric guitars sometimes mount pickups and electronics on the pickguard. It is a common feature on steel-string acoustic guitars. Some performance styles that use the guitar as a percussion instrument (tapping the top or sides between notes, etc.), such as flamenco, require that a scratchplate or pickguard be fitted to nylon-string instruments.

Archtop guitars are steel-string instruments in which the top (and often the back) of the instrument are carved, from a solid billet, into a curved, rather than a flat, shape. This violin-like construction is usually credited to the American Orville Gibson. Lloyd Loar of the Gibson Mandolin-Guitar Mfg. Co introduced the violin-inspired "F"-shaped hole design now usually associated with archtop guitars, after designing a style of mandolin of the same type. The typical archtop guitar has a large, deep, hollow body whose form is much like that of a mandolin or a violin-family instrument. Nowadays, most archtops are equipped with magnetic pickups, and they are therefore both acoustic and electric. F-hole archtop guitars were immediately adopted, upon their release, by both jazz and country musicians, and have remained particularly popular in jazz music, usually with flatwound strings.
A six-string guitar has five musical-intervals between its consecutive strings. In standard tuning, the intervals are four perfect-fourths and one major-third, the comparatively irregular interval for the (G,B) pair. Consequently, standard tuning requires four chord-shapes for the major chords. There are separate chord-forms for chords having their root note on the third, fourth, fifth, and sixth strings.[41] Of course, a beginner learns guitar by learning notes and chords,[42] and irregularities make learning the guitar difficult[43]—even more difficult than learning the formation of plural nouns in German, according to Gary Marcus.[44] Nonetheless, most beginners use standard tuning.[45]
First, you need to determine what type of guitar you have - acoustic nylon, acoustic steel string, or electric. You want to be sure to use the correct strings for your particular guitar. Acoustic guitars that require nylon strings, such as classical, flamenco and some folk guitars, generally have lighter tops, or soundboards, with less internal bracing than those found on steel-string acoustics, and stand the risk of serious damage if fitted with steel strings. Steel-string acoustics are designed to withstand the added stress that steel strings exert on the top, bridge, nut and neck, and won't sound very good with nylon strings, if they even fit. Electric guitar strings must be made of ferromagnetic metals like steel and nickel, so they can interact with the magnetic pickups, while acoustic-electric guitars typically use a different type of pickup which senses vibrations from the bridge, so acoustic strings may just have a steel core wound with a phosphor bronze alloy wrap for bright tone. Guitars with whammy bars might require a few extra steps to keep everything stable, so check your manufacturer's instructions or look for online videos.
As their categorical name suggests, extended chords indeed extend seventh chords by stacking one or more additional third-intervals, successively constructing ninth, eleventh, and finally thirteenth chords; thirteenth chords contain all seven notes of the diatonic scale. In closed position, extended chords contain dissonant intervals or may sound supersaturated, particularly thirteenth chords with their seven notes. Consequently, extended chords are often played with the omission of one or more tones, especially the fifth and often the third,[92][93] as already noted for seventh chords; similarly, eleventh chords often omit the ninth, and thirteenth chords the ninth or eleventh. Often, the third is raised an octave, mimicking its position in the root's sequence of harmonics.[92]
The next step is to figure out what gauge, or thickness of string is best suited to your playing ability and style. Thinner gauges are easier to fret and bend, and may be better suited for beginners, until callouses build up on the fingertips. Heavier strings tend to produce greater volume and fuller tone. Nylon strings are typically categorized as light, medium or heavy tension. Steel strings for both electric and acoustic guitars are categorized by the gauge, or thickness of the lightest string, the high E string, measured in thousandths of an inch, with .09 being a common size for an electric set. A set of electric strings may be labeled .09-.042 - this is the gauge of the lightest and heaviest string in the set. Acoustic sets are a little thicker, so a typical medium-gauge set might be .012-.054.
We believe that music is a social activity so we present students with numerous opportunities to interact with each other. Each year we hold multiple recitals which offer a low-pressure opportunity to perform in front of an audience with other like-minded music students.  In addition to recitals, students frequently go out into the community to perform outreach concerts at local hospitals, schools, and nursing homes. Students also have the option to join group classes at our Santa Clara location. This offers students a chance to perform for each other more frequently, as well as join on our many performance ensembles. 

Kyser®'s nickel-plated electric guitar strings give you a warm, rich, full sound. They are precision wound around a carefully drawn hex shaped carbon steel core. The outer nickel-plated wrap maintains constant contact with the hex core resulting in a string that vibrates evenly for maximum sustain, smooth sound, and allows easy bending. Click the individual string images to view more gauge information.
Guitarists don’t have to just look on in envy as pianists lead the holiday sing-a-longs this Christmas. Our selection of holiday Guitar Tabs include traditional classics we all love like “O Holy Night” and “Carol of the Bells” and the pop favorites that just wouldn’t be the same without a guitar, like “Jingle Bell Rock” and “Happy Xmas (War is Over)” by John Lennon. But if you just can’t get enough of those traditional Christmas classics, you can pick up our collection of ’Christmas Favorites for Guitar.’