The main purpose of the bridge on an acoustic guitar is to transfer the vibration from the strings to the soundboard, which vibrates the air inside of the guitar, thereby amplifying the sound produced by the strings. On all electric, acoustic and original guitars, the bridge holds the strings in place on the body. There are many varied bridge designs. There may be some mechanism for raising or lowering the bridge saddles to adjust the distance between the strings and the fretboard (action), or fine-tuning the intonation of the instrument. Some are spring-loaded and feature a "whammy bar", a removable arm that lets the player modulate the pitch by changing the tension on the strings. The whammy bar is sometimes also called a "tremolo bar". (The effect of rapidly changing pitch is properly called "vibrato". See Tremolo for further discussion of this term.) Some bridges also allow for alternate tunings at the touch of a button.
As a beginner guitar player, one of the most difficult hurdles to overcome is that of transition between chords. We learn the chords to our favourite songs or a new complex chord shape, but when it comes to making music with them, our lack of muscle memory and dexterity inhibits us from stringing these chords together in a meaningful and comprehensive manner.
Solid body seven-string guitars were popularized in the 1980s and 1990s. Other artists go a step further, by using an eight-string guitar with two extra low strings. Although the most common seven-string has a low B string, Roger McGuinn (of The Byrds and Rickenbacker) uses an octave G string paired with the regular G string as on a 12-string guitar, allowing him to incorporate chiming 12-string elements in standard six-string playing. In 1982 Uli Jon Roth developed the "Sky Guitar", with a vastly extended number of frets, which was the first guitar to venture into the upper registers of the violin. Roth's seven-string and "Mighty Wing" guitar features a wider octave range.[citation needed]
To play a C chord on a guitar, put your ring finger on the third fret on the A string, your middle finger on the second fret on the D string, leave the G string open, and put your index finger on the first fret of the B string. Before you try to strum the chord, play each note individually until the note sounds clear. When you've mastered the C chord, try moving on to other chords like G or F.
Almost all guitars have frets, which are metal strips (usually nickel alloy or stainless steel) embedded along the fretboard and located at exact points that divide the scale length in accordance with a specific mathematical formula. The exceptions include fretless bass guitars and very rare fretless guitars. Pressing a string against a fret determines the strings' vibrating length and therefore its resultant pitch. The pitch of each consecutive fret is defined at a half-step interval on the chromatic scale. Standard classical guitars have 19 frets and electric guitars between 21 and 24 frets, although guitars have been made with as many as 27 frets. Frets are laid out to accomplish an equal tempered division of the octave. Each set of twelve frets represents an octave. The twelfth fret divides the scale length exactly into two halves, and the 24th fret position divides one of those halves in half again.
Body size, shape and style has changed over time. 19th century guitars, now known as salon guitars, were smaller than modern instruments. Differing patterns of internal bracing have been used over time by luthiers. Torres, Hauser, Ramirez, Fleta, and C. F. Martin were among the most influential designers of their time. Bracing not only strengthens the top against potential collapse due to the stress exerted by the tensioned strings, but also affects the resonance characteristics of the top. The back and sides are made out of a variety of timbers such as mahogany, Indian rosewood and highly regarded Brazilian rosewood (Dalbergia nigra). Each one is primarily chosen for their aesthetic effect and can be decorated with inlays and purfling.


Whether you just started guitar lessons or you've been playing for a while, you may be itching to learn some new songs and take on some new challenges. You might be wondering: where can I go from here? That's where alternate guitar tunings come in! With this guide from Michael L., you'll learn how alternate guitar tunings can take your playing to the next level... One of the amazing things about the guitar is its versatility. Not only can you play rhythm and/or melody in different genres,
The ratio of the spacing of two consecutive frets is {\displaystyle {\sqrt[{12}]{2}}} (twelfth root of two). In practice, luthiers determine fret positions using the constant 17.817—an approximation to 1/(1-1/ {\displaystyle {\sqrt[{12}]{2}}} ). If the nth fret is a distance x from the bridge, then the distance from the (n+1)th fret to the bridge is x-(x/17.817).[15] Frets are available in several different gauges and can be fitted according to player preference. Among these are "jumbo" frets, which have much thicker gauge, allowing for use of a slight vibrato technique from pushing the string down harder and softer. "Scalloped" fretboards, where the wood of the fretboard itself is "scooped out" between the frets, allow a dramatic vibrato effect. Fine frets, much flatter, allow a very low string-action, but require that other conditions, such as curvature of the neck, be well-maintained to prevent buzz.
I was lucky enough to meet Justin at the Guitar Institute during a summer school in 2004, and to have some private lessons with him afterwards.  He was the teacher who kickstarted my guitar career and persuaded me that I was ready to join a band.  That was 14 years ago and many dozens of gigs later.  I’m now just finishing a degree in Popular Music Performance.  Justin's online lessons are easy to follow and he has a manner about him which makes you believe that you can achieve.  Where he demonstrates songs, I have found his versions to be consistently more accurate and easy to follow than those of any other online teacher.  On this website you really will find all the skills and information you need to become an excellent musician.  Many thanks. Ian.
Most electric guitar bodies are made of wood and include a plastic pick guard. Boards wide enough to use as a solid body are very expensive due to the worldwide depletion of hardwood stock since the 1970s, so the wood is rarely one solid piece. Most bodies are made from two pieces of wood with some of them including a seam running down the center line of the body. The most common woods used for electric guitar body construction include maple, basswood, ash, poplar, alder, and mahogany. Many bodies consist of good-sounding, but inexpensive woods, like ash, with a "top", or thin layer of another, more attractive wood (such as maple with a natural "flame" pattern) glued to the top of the basic wood. Guitars constructed like this are often called "flame tops". The body is usually carved or routed to accept the other elements, such as the bridge, pickup, neck, and other electronic components. Most electrics have a polyurethane or nitrocellulose lacquer finish. Other alternative materials to wood are used in guitar body construction. Some of these include carbon composites, plastic material, such as polycarbonate, and aluminum alloys.
With that being said, nickel strings definitely have a richer tone with more body than steel strings. This warmth is especially pleasing when used to play older genres of music, blues in particular. The strings are also a great fit for rhythm work, because the warmth inherent to these strings helps to increase the overall body and richness of a mix.
A six-string guitar has five musical-intervals between its consecutive strings. In standard tuning, the intervals are four perfect-fourths and one major-third, the comparatively irregular interval for the (G,B) pair. Consequently, standard tuning requires four chord-shapes for the major chords. There are separate chord-forms for chords having their root note on the third, fourth, fifth, and sixth strings.[41] Of course, a beginner learns guitar by learning notes and chords,[42] and irregularities make learning the guitar difficult[43]—even more difficult than learning the formation of plural nouns in German, according to Gary Marcus.[44] Nonetheless, most beginners use standard tuning.[45]


At MI, you learn from a proven curriculum taught by the best guitar instructors in the world, augmented by visiting artists’ seminars, concerts, and lessons from some of the greatest players in contemporary music. At our guitar music college, you get to network with other players, find your creative voice, and get the training you need to become the player you have always dreamed of being.