The types and models of pickups used can greatly affect the tone of the guitar. Typically, humbuckers, which are two magnet-coil assemblies attached to each other, are traditionally associated with a heavier sound. Single-coil pickups, one magnet wrapped in copper wire, are used by guitarists seeking a brighter, twangier sound with greater dynamic range.
Getting to grips with how chords are formed gives you a basic introduction to music theory and helps you understand the ways you can alter them to create more interesting sounds. All chords are built from certain notes in scales. The C major scale is the easiest, because it just runs C, D, E, F, G, A and B. These notes are numbered (usually using Roman numerals) in that order, from one (I) to seven (VII).
All three principal types of resonator guitars were invented by the Slovak-American John Dopyera (1893–1988) for the National and Dobro (Dopyera Brothers) companies. Similar to the flat top guitar in appearance, but with a body that may be made of brass, nickel-silver, or steel as well as wood, the sound of the resonator guitar is produced by one or more aluminum resonator cones mounted in the middle of the top. The physical principle of the guitar is therefore similar to the loudspeaker.

The intervals between the notes of a chromatic scale are listed in a table, in which only the emboldened intervals are discussed in this article's section on fundamental chords; those intervals and other seventh-intervals are discussed in the section on intermediate chords. The unison and octave intervals have perfect consonance. Octave intervals were popularized by the jazz playing of Wes Montgomery. The perfect-fifth interval is highly consonant, which means that the successive playing of the two notes from the perfect fifth sounds harmonious.


There are two basic types of electric guitars: solidbody and hollowbody. Today, the electric guitar still features in all types of music Ð rock, blues, jazz and big bands Ð and is played by men and women, young and old, throughout the world. Some well-known electric guitarists include Muddy Waters, Jimi Hendrix, Eric Clapton, Jimmy Page, Eddie Van Halen, Steve Vai, Joe Satriani, Pat Metheny, Wes Montgomery, Chrissie Hynde and Liz Phair.
The horizontal lines represent the frets on the guitar and the vertical lines represent the strings. The numbers listed let you know what fret number it is referring too. If there is an X it means don't play that string and if there is a 0 it means to play that string but do not press down on it anywhere. The black circles show you where to press down.
The top, back and ribs of an acoustic guitar body are very thin (1–2 mm), so a flexible piece of wood called lining is glued into the corners where the rib meets the top and back. This interior reinforcement provides 5 to 20 mm of solid gluing area for these corner joints. Solid linings are often used in classical guitars, while kerfed lining is most often found in steel string acoustics. Kerfed lining is also called kerfing because it is scored, or "kerfed"(incompletely sawn through), to allow it to bend with the shape of the rib). During final construction, a small section of the outside corners is carved or routed out and filled with binding material on the outside corners and decorative strips of material next to the binding, which are called purfling. This binding serves to seal off the end grain of the top and back. Purfling can also appear on the back of an acoustic guitar, marking the edge joints of the two or three sections of the back. Binding and purfling materials are generally made of either wood or plastic.
Justin Sandercoe has thought long and hard about how to teach people to play the guitar, and how to do this over the internet. He has come up with a well-designed series of courses that will take you from nowhere to proficiency. I tried to learn how to play years ago, using books, and got nowhere. I've been using Justin's site for just over a year and I feel I've made real progress. What's more, Justin offers his lessons for free - a boon for any young player who has the urge to play, but whose pockets are empty. I've seen and used other sites for learners: none of them offer as clearly marked a road as Justin does.
First, you need to determine what type of guitar you have - acoustic nylon, acoustic steel string, or electric. You want to be sure to use the correct strings for your particular guitar. Acoustic guitars that require nylon strings, such as classical, flamenco and some folk guitars, generally have lighter tops, or soundboards, with less internal bracing than those found on steel-string acoustics, and stand the risk of serious damage if fitted with steel strings. Steel-string acoustics are designed to withstand the added stress that steel strings exert on the top, bridge, nut and neck, and won't sound very good with nylon strings, if they even fit. Electric guitar strings must be made of ferromagnetic metals like steel and nickel, so they can interact with the magnetic pickups, while acoustic-electric guitars typically use a different type of pickup which senses vibrations from the bridge, so acoustic strings may just have a steel core wound with a phosphor bronze alloy wrap for bright tone. Guitars with whammy bars might require a few extra steps to keep everything stable, so check your manufacturer's instructions or look for online videos.
The Master of Music in Performance (Guitar) from Musicians Institute combines advanced performance training with additional study in both traditional and contemporary disciplines such as music history, theory, education, research skills, recording technology, production, business relations and online brand management, taking your guitar skills to the highest level.
×