Ernie Ball is the world's leading manufacturer of premium electric, acoustic, and classical guitar strings, bass strings, mandolin, banjo, pedal steel strings and guitar accessories. Our strings have been played on many of the best-selling albums of all time and are used by some of history’s greatest musicians including Paul McCartney, Eric Clapton, Jimmy Page, Slash, The Rolling Stones, Angus Young, Eagles, Jeff Beck, Pete Townshend, Aerosmith, Metallica, and more.
As a general rule, brass strings are always going to be brighter than bronze strings. Though, counterintuitively, many brass strings go by the moniker of “80/20” bronze. These strings are actually the one in the same. Brass, or 80/20 bronze as it’s often known, is made from 80% copper and 20% zinc. This gives the strings a bright and cutting voice, though when used on guitars that already have a prominent high-end response it can make an instrument sound thin and tinny. For best results, use brass strings on a guitar that’s an OM size or larger (so this would include OM guitars, dreadnoughts, and jumbos).
The top, back and ribs of an acoustic guitar body are very thin (1–2 mm), so a flexible piece of wood called lining is glued into the corners where the rib meets the top and back. This interior reinforcement provides 5 to 20 mm of solid gluing area for these corner joints. Solid linings are often used in classical guitars, while kerfed lining is most often found in steel string acoustics. Kerfed lining is also called kerfing because it is scored, or "kerfed"(incompletely sawn through), to allow it to bend with the shape of the rib). During final construction, a small section of the outside corners is carved or routed out and filled with binding material on the outside corners and decorative strips of material next to the binding, which are called purfling. This binding serves to seal off the end grain of the top and back. Purfling can also appear on the back of an acoustic guitar, marking the edge joints of the two or three sections of the back. Binding and purfling materials are generally made of either wood or plastic.
Modern pickups are tailored to the sound desired. A commonly applied approximation used in selection of a pickup is that less wire (lower electrical impedance) gives brighter sound, more wire gives a "fat" tone. Other options include specialized switching that produces coil-splitting, in/out of phase and other effects. Guitar circuits are either active, needing a battery to power their circuit, or, as in most cases, equipped with a passive circuit.
So with that in mind, would you like to learn the guitar on your own or with others? The choice is yours at Guitar Center. If you prefer one-on-one instruction, that's absolutely doable - in fact, you'll find our schedule to be very flexible. Of course, learning in a group is an excellent way to meet like-minded musicians with similar tastes and share ideas on how to improve one another's craft. Who knows, you might even leave a group guitar lesson with plans to start a band with your newfound musical companions. Either way, our group and private guitar lessons are very entertaining and informative.
There are two basic types of electric guitars: solidbody and hollowbody. Today, the electric guitar still features in all types of music Ð rock, blues, jazz and big bands Ð and is played by men and women, young and old, throughout the world. Some well-known electric guitarists include Muddy Waters, Jimi Hendrix, Eric Clapton, Jimmy Page, Eddie Van Halen, Steve Vai, Joe Satriani, Pat Metheny, Wes Montgomery, Chrissie Hynde and Liz Phair.
The headstock is located at the end of the guitar neck farthest from the body. It is fitted with machine heads that adjust the tension of the strings, which in turn affects the pitch. The traditional tuner layout is "3+3", in which each side of the headstock has three tuners (such as on Gibson Les Pauls). In this layout, the headstocks are commonly symmetrical. Many guitars feature other layouts, including six-in-line tuners (featured on Fender Stratocasters) or even "4+2" (e.g. Ernie Ball Music Man). Some guitars (such as Steinbergers) do not have headstocks at all, in which case the tuning machines are located elsewhere, either on the body or the bridge.
The E minor chord is one of the simplest to play because you only use two fingers Take extra care not to allow either of them to touch any of the open strings, or the chord won't ring properly. Strum all six strings. In certain situations, it may make sense to reverse your finger position so that your second finger is on the fifth string, and your third finger is on the fourth string.