The Guitar Center Lessons curriculum is based on a progressive advancement model. This proven method provides a well-defined roadmap of the material covered and skills taught so you can easily track your past and future progress. Since we use the same curriculum in all locations, students have the flexibility to take lessons from any instructor at any of our locations and progress through the same content. Our program is fun but challenging–both for beginners and serious musicians who want to improve their existing chops.

As a general rule, brass strings are always going to be brighter than bronze strings. Though, counterintuitively, many brass strings go by the moniker of “80/20” bronze. These strings are actually the one in the same. Brass, or 80/20 bronze as it’s often known, is made from 80% copper and 20% zinc. This gives the strings a bright and cutting voice, though when used on guitars that already have a prominent high-end response it can make an instrument sound thin and tinny. For best results, use brass strings on a guitar that’s an OM size or larger (so this would include OM guitars, dreadnoughts, and jumbos).
The ratio of the spacing of two consecutive frets is {\displaystyle {\sqrt[{12}]{2}}} (twelfth root of two). In practice, luthiers determine fret positions using the constant 17.817—an approximation to 1/(1-1/ {\displaystyle {\sqrt[{12}]{2}}} ). If the nth fret is a distance x from the bridge, then the distance from the (n+1)th fret to the bridge is x-(x/17.817).[15] Frets are available in several different gauges and can be fitted according to player preference. Among these are "jumbo" frets, which have much thicker gauge, allowing for use of a slight vibrato technique from pushing the string down harder and softer. "Scalloped" fretboards, where the wood of the fretboard itself is "scooped out" between the frets, allow a dramatic vibrato effect. Fine frets, much flatter, allow a very low string-action, but require that other conditions, such as curvature of the neck, be well-maintained to prevent buzz.
Are you stuck in a musical rut? New tunings and tricks can help you keep learning guitar in fresh, fun ways. Try one of these great tips from guitar teacher Samuel B. to breathe new life into your guitar playing... One of the first things I tell any new student is that I don't specialize in a formal discipline. If jazz or classical training is your objective, then I'm not your guy. Instead, I specialize primarily in American roots music (that which we tend to casually lump together as "folk"
After you’re feeling more comfortable with the transitions, plug in this progression to your Uberchord. You should find that it’s much easier to play along with the progressions. Even with chords you aren’t yet comfortable with. The key to playing cleanly and precisely is training yourself to pay attention to the movement of your fingers. You’ll find that this heightened awareness translates into every new chord you learn.
As already stated, the perfect-fifths (P5) interval is the most harmonious, after the unison and octave intervals. An explanation of human perception of harmony relates the mechanics of a vibrating string to the musical acoustics of sound waves using the harmonic analysis of Fourier series. When a string is struck with a finger or pick (plectrum), it vibrates according to its harmonic series. When an open-note C-string is struck, its harmonic series begins with the terms (C,C,G,C,E,G,B♭,C). The root note is associated with a sequence of intervals, beginning with the unison interval (C,C), the octave interval (C,C), the perfect fifth (C,G), the perfect fourth (G,C), and the major third (C,E). In particular, this sequence of intervals contains the thirds of the C-major chord {(C,E),(E,G)}.[4]
A chord is inverted when the bass note is not the root note. Chord inversion is especially simple in M3 tuning. Chords are inverted simply by raising one or two notes by three strings; each raised note is played with the same finger as the original note. Inverted major and minor chords can be played on two frets in M3 tuning.[56][74] In standard tuning, the shape of inversions depends on the involvement of the irregular major-third, and can involve four frets.[75]

## At least two instruments called "guitars" were in use in Spain by 1200: the guitarra latina (Latin guitar) and the so-called guitarra morisca (Moorish guitar). The guitarra morisca had a rounded back, wide fingerboard, and several sound holes. The guitarra Latina had a single sound hole and a narrower neck. By the 14th century the qualifiers "moresca" or "morisca" and "latina" had been dropped, and these two cordophones were simply referred to as guitars.[8]

Almost all guitars have frets, which are metal strips (usually nickel alloy or stainless steel) embedded along the fretboard and located at exact points that divide the scale length in accordance with a specific mathematical formula. The exceptions include fretless bass guitars and very rare fretless guitars. Pressing a string against a fret determines the strings' vibrating length and therefore its resultant pitch. The pitch of each consecutive fret is defined at a half-step interval on the chromatic scale. Standard classical guitars have 19 frets and electric guitars between 21 and 24 frets, although guitars have been made with as many as 27 frets. Frets are laid out to accomplish an equal tempered division of the octave. Each set of twelve frets represents an octave. The twelfth fret divides the scale length exactly into two halves, and the 24th fret position divides one of those halves in half again.
The playing of conventional chords is simplified by open tunings, which are especially popular in folk, blues guitar and non-Spanish classical guitar (such as English and Russian guitar). For example, the typical twelve-bar blues uses only three chords, each of which can be played (in every open tuning) by fretting six-strings with one finger. Open tunings are used especially for steel guitar and slide guitar. Open tunings allow one-finger chords to be played with greater consonance than do other tunings, which use equal temperament, at the cost of increasing the dissonance in other chords.
{"eVar4":"shop: accessories","eVar5":"shop: accessories: strings","pageName":"[gc] shop: accessories: strings","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: accessories: strings","prop1":"[gc] shop: accessories","evar51":"default: united states","prop10":"category","prop11":"strings","prop5":"[gc] shop: accessories: strings","prop6":"[gc] shop: accessories: strings","prop3":"[gc] shop: accessories: strings","prop4":"[gc] shop: accessories: strings","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}
Entire contents Copyright © Musician's Friend Inc. Musician's Friend is a registered trademark of Musician's Friend Inc. All Rights Reserved. Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer's specifications or changes, or grammatical inaccuracies in any product included in the Musician's Friend catalog or website. Prices subject to change without notice.

MIDI converters use a hexaphonic guitar signal to determine pitch, duration, attack, and decay characteristics. The MIDI sends the note information to an internal or external sound bank device. The resulting sound closely mimics numerous instruments. The MIDI setup can also let the guitar be used as a game controller (i.e., Rock Band Squier) or as an instructional tool, as with the Fretlight Guitar.
Guitar Chords are a group of at least 3 notes played together, this means three different notes, i.e. notes with 3 different pitches. If, for example, you select an E major chord on the guitar chord generator on this page, you can see the 3 notes E, B and G# (Ab) make up this chord. Some notes can be expressed as either sharp or flat (enharmonic spelling), the notes sound just the same but the naming of them is decided by which key the song is in. You can find out more about this in our music theory section.
Our Suzuki teachers are experienced in teaching CCM students as young as 3. Developed by the Japanese Violinist Shinichi Suzuki, the Suzuki method teaches music by ear before reading notes on the instrument so teachers can focus on setting up each student with correct posture and technique to ensure the student's continued success. Parental involvement is required for students under the age of 8 and before the child starts, parents are required to attend a private 3-week parent education class.
There's an abundance of guitar information out there on the web, some good, some not. I stumbled across Justin Sandercoe's site a year ago and now tell everyone about it. The lessons are conveyed so clearly, concisely and in the most congenial way. The site is laid out logically as well so you can to go straight to your area of interest... beginner, blues, rock, folk, jazz, rhythm, fingerpicking... it's all there and more. Spend ten minutes with Justin and you'll not only play better but feel better too. From novice to know-it-all, everyone will learn something from Sandercoe.
Dots are usually inlaid into the upper edge of the fretboard in the same positions, small enough to be visible only to the player. These usually appear on the odd numbered frets, but also on the 12th fret (the one octave mark) instead of the 11th and 13th frets. Some older or high-end instruments have inlays made of mother of pearl, abalone, ivory, colored wood or other exotic materials and designs. Simpler inlays are often made of plastic or painted. High-end classical guitars seldom have fretboard inlays as a well-trained player is expected to know his or her way around the instrument. In addition to fretboard inlay, the headstock and soundhole surround are also frequently inlaid. The manufacturer's logo or a small design is often inlaid into the headstock. Rosette designs vary from simple concentric circles to delicate fretwork mimicking the historic rosette of lutes. Bindings that edge the finger and sound boards are sometimes inlaid. Some instruments have a filler strip running down the length and behind the neck, used for strength or to fill the cavity through which the truss rod was installed in the neck.
A capo (short for capotasto) is used to change the pitch of open strings.[28] Capos are clipped onto the fretboard with the aid of spring tension, or in some models, elastic tension. To raise the guitar's pitch by one semitone, the player would clip the capo onto the fretboard just below the first fret. Its use allows players to play in different keys without having to change the chord formations they use. For example, if a folk guitar player wanted to play a song in the key of B Major, they could put a capo on the second fret of the instrument, and then play the song as if it were in the key of A Major, but with the capo the instrument would make the sounds of B Major. This is because with the capo barring the entire second fret, open chords would all sound two semitones (aka one tone) higher in pitch. For example, if a guitarist played an open A Major chord (a very common open chord), it would sound like a B Major chord. All of the other open chords would be similarly modified in pitch. Because of the ease with which they allow guitar players to change keys, they are sometimes referred to with pejorative names, such as "cheaters" or the "hillbilly crutch". Despite this negative viewpoint, another benefit of the capo is that it enables guitarists to obtain the ringing, resonant sound of the common keys (C, G, A, etc.) in "harder" and less-commonly used keys. Classical performers are known to use them to enable modern instruments to match the pitch of historical instruments such as the Renaissance music lute.
Ive been playing guitar for about 3 years, and this is the best song book I have ever learned from. Songs range from sweet home alabama by lynard skynard all the way to raining blood by slayer. All of the songs are accurate and complete with notes, tabs, lyrics, and copyright info. If you are like me, and you prefer to learn songs the way they were meant to be played than this book is for you.


MIDI converters use a hexaphonic guitar signal to determine pitch, duration, attack, and decay characteristics. The MIDI sends the note information to an internal or external sound bank device. The resulting sound closely mimics numerous instruments. The MIDI setup can also let the guitar be used as a game controller (i.e., Rock Band Squier) or as an instructional tool, as with the Fretlight Guitar.


A few years back, I dusted off the ol' Takamine I got in high school to try some 'music therapy' with my disabled son, who was recovering from a massive at-birth stroke. This reignited my long dormant passion to transform myself from a beach strummer to a 'real' musician; however, as a single mom, taking in-person lessons was financially difficult. Then I found Justinguitar! Flash forward to today; my son is almost fully recovered (YAY!), my guitar collection has grown significantly, and I'm starting to play gigs. None of this would have been possible without your guidance and generosity, Justin. Thank you for being part of the journey!
The neck joint or heel is the point at which the neck is either bolted or glued to the body of the guitar. Almost all acoustic steel-string guitars, with the primary exception of Taylors, have glued (otherwise known as set) necks, while electric guitars are constructed using both types. Most classical guitars have a neck and headblock carved from one piece of wood, known as a "Spanish heel." Commonly used set neck joints include mortise and tenon joints (such as those used by C. F. Martin & Co.), dovetail joints (also used by C. F. Martin on the D-28 and similar models) and Spanish heel neck joints, which are named after the shoe they resemble and commonly found in classical guitars. All three types offer stability.
With just a little more music theory, you can learn to write simple songs with the chords you've just learned. The song would be in the key of C major (C, D, E, F, G, A and B). You can use the major chords for the I, IV and V notes and the minors for the II, III and VI notes. That means you can play a chord progression which uses all of the chords you've learnt, if you want to.


On guitars that have them, these components and the wires that connect them allow the player to control some aspects of the sound like volume or tone using knobs, switches, or buttons. The most basic electronic control is a volume knob. Some guitars also have a tone-control knob, and some guitars with multiple pickups have pickup selector switches or knobs to determine which pickup(s) are activated. At their simplest, these consist of passive components, such as potentiometers and capacitors, but may also include specialized integrated circuits or other active components requiring batteries for power, for preamplification and signal processing, or even for electronic tuning. In many cases, the electronics have some sort of shielding to prevent pickup of external interference and noise.
The BMus in performance with a concentration in guitar is a program that focuses on the study of classical guitar literature and techniques. Goals include enabling students to express themselves musically while emphasizing the skills necessary to pursue careers as professional musicians. The course of study includes extensive performance experiences.