Vesala - Muitaki Ihmisii The Ridleys - Maybe The Payolas - Christmas Is Coming The Skywalkers - My Sense Of Fear Tony Cetinski - Sto Si Ti Meni Hotel Books - I Knew Better But Did Nothing The Grays - Everybodys World The Tide - Hey Everybody AVVAH - Kaleidoskop Hearts & Colors - Can't Help Falling In Love Cashew Chemists - Common Equation Sakari Kuosmanen - Laulajan Helmi Remo Drive - Strawberita Jordan Fisher - Mess Kaseva - Silloin Kun

As a general rule, brass strings are always going to be brighter than bronze strings. Though, counterintuitively, many brass strings go by the moniker of “80/20” bronze. These strings are actually the one in the same. Brass, or 80/20 bronze as it’s often known, is made from 80% copper and 20% zinc. This gives the strings a bright and cutting voice, though when used on guitars that already have a prominent high-end response it can make an instrument sound thin and tinny. For best results, use brass strings on a guitar that’s an OM size or larger (so this would include OM guitars, dreadnoughts, and jumbos).
The pickguard, also known as the scratchplate, is usually a piece of laminated plastic or other material that protects the finish of the top of the guitar from damage due to the use of a plectrum ("pick") or fingernails. Electric guitars sometimes mount pickups and electronics on the pickguard. It is a common feature on steel-string acoustic guitars. Some performance styles that use the guitar as a percussion instrument (tapping the top or sides between notes, etc.), such as flamenco, require that a scratchplate or pickguard be fitted to nylon-string instruments.

The musical theory of chords is reviewed, to provide terminology for a discussion of guitar chords. Three kinds of chords, which are emphasized in introductions to guitar-playing,[10][11] are discussed. These basic chords arise in chord-triples that are conventional in Western music, triples that are called three-chord progressions. After each type of chord is introduced, its role in three-chord progressions is noted.

The top, back and ribs of an acoustic guitar body are very thin (1–2 mm), so a flexible piece of wood called lining is glued into the corners where the rib meets the top and back. This interior reinforcement provides 5 to 20 mm of solid gluing area for these corner joints. Solid linings are often used in classical guitars, while kerfed lining is most often found in steel string acoustics. Kerfed lining is also called kerfing because it is scored, or "kerfed"(incompletely sawn through), to allow it to bend with the shape of the rib). During final construction, a small section of the outside corners is carved or routed out and filled with binding material on the outside corners and decorative strips of material next to the binding, which are called purfling. This binding serves to seal off the end grain of the top and back. Purfling can also appear on the back of an acoustic guitar, marking the edge joints of the two or three sections of the back. Binding and purfling materials are generally made of either wood or plastic.
I use this book in my Music Therapy sessions with Geriatric clients--and they love it! The songs are well-known and fun--mostly folk tunes like I've Been Working on the Railroad and My Bonnie Lies Over the Ocean. Chords are SO simple--no bar chords (so you may need a capo to adjust the key). If you're looking for the most basic way to play favorite songs...this is the way to go!
There are separate chord-forms for chords having their root note on the third, fourth, fifth, and sixth strings. For a six-string guitar in standard tuning, it may be necessary to drop or omit one or more tones from the chord; this is typically the root or fifth. The layout of notes on the fretboard in standard tuning often forces guitarists to permute the tonal order of notes in a chord.
The black dots found on the chord diagrams tell you which fret to press down, and on which string and with which numbered finger. Additionally, you will sometimes see circles above the nut. These circles tell you to play that open string without pressing any fret. So using what we know so far about strings, finger numbers, and dots, let’s check out that same chord diagram again:
The fingerboard, also called the fretboard, is a piece of wood embedded with metal frets that comprises the top of the neck. It is flat on classical guitars and slightly curved crosswise on acoustic and electric guitars. The curvature of the fretboard is measured by the fretboard radius, which is the radius of a hypothetical circle of which the fretboard's surface constitutes a segment. The smaller the fretboard radius, the more noticeably curved the fretboard is. Most modern guitars feature a 12" neck radius, while older guitars from the 1960s and 1970s usually feature a 6-8" neck radius. Pinching a string against a fret on fretboard effectively shortens the vibrating length of the string, producing a higher pitch.
Guitars have been played since the Renaissance era, after descending from the ancient Greek instrument, the kithara. Or, at least, that's how the theory goes: the only real proof for this is the similarities between the Greek word and the Spanish word, quitarra. Early guitars often had four strings, evolving into the six-string version we know today in the late 1600s. Anton Stradivari, the famous violin-maker, also had a hand in making guitars. There's now only one Stradivarius guitar left in existence.