The truss rod is a thin, strong metal rod that runs along the inside of the neck. It is used to correct changes to the neck's curvature caused by aging of the neck timbers, changes in humidity, or to compensate for changes in the tension of strings. The tension of the rod and neck assembly is adjusted by a hex nut or an allen-key bolt on the rod, usually located either at the headstock, sometimes under a cover, or just inside the body of the guitar underneath the fretboard and accessible through the sound hole. Some truss rods can only be accessed by removing the neck. The truss rod counteracts the immense amount of tension the strings place on the neck, bringing the neck back to a straighter position. Turning the truss rod clockwise tightens it, counteracting the tension of the strings and straightening the neck or creating a backward bow. Turning the truss rod counter-clockwise loosens it, allowing string tension to act on the neck and creating a forward bow.
Octo Music Studio teaches piano and guitar lessons to adults and children 5 years and older.  Our lessons are personalized and are exciting this results in the fastest possible progress for all students. We use the best computer guided music teaching programs to teach and are ranked in the top best 18 best music studios in Brooklyn, NY. Our piano or guitar teachers have over 30 years experience. Learn Gospel,...
I would especially like to stress the gentle approach Justin takes with two key aspects that contributed to my development as a musician - music theory and ear training. Justin has succeeded in conveying the importance and profoundness of understanding music both theoretically and through your ears while maintaining a simple and accessible approach to them, all while sticking to what is ultimately the most important motto: 'If it sounds good, it is good'.

You can tell whether or not strings are of a thin or thick gauge based on the numbers on the package. The smallest number, which is the gauge of thinnest string, will usually be .9 or lower on thin gauge strings. On thick gauge strings this number will be .12 or higher. Strings that are .10 or .11 are generally considered to be “mediums”, and produce a tone and feel which is the middle ground between these two extremes.
The headstock is located at the end of the guitar neck farthest from the body. It is fitted with machine heads that adjust the tension of the strings, which in turn affects the pitch. The traditional tuner layout is "3+3", in which each side of the headstock has three tuners (such as on Gibson Les Pauls). In this layout, the headstocks are commonly symmetrical. Many guitars feature other layouts, including six-in-line tuners (featured on Fender Stratocasters) or even "4+2" (e.g. Ernie Ball Music Man). Some guitars (such as Steinbergers) do not have headstocks at all, in which case the tuning machines are located elsewhere, either on the body or the bridge.
An open tuning allows a chord to be played by strumming the strings when "open", or while fretting no strings. The base chord consists of at least three notes and may include all the strings or a subset. The tuning is named for the base chord when played open, typically a major triad, and each major-triad can be played by barring exactly one fret.[60] Open tunings are common in blues and folk music,[59] and they are used in the playing of slide and lap-slide ("Hawaiian") guitars.[60][61] Ry Cooder uses open tunings when he plays slide guitar.[59]
If you know how to play an E major chord, then you know how to play an A minor chord—just move the chord whole shape over a string. Make sure your first finger is curled, so the open first string rings clearly. Avoid playing the open sixth string when strumming the A minor chord. There are situations when it makes sense to reverse your second and third fingers when playing the A minor chord.
The playing of (3-5 string) guitar chords is simplified by the class of alternative tunings called regular tunings, in which the musical intervals are the same for each pair of consecutive strings. Regular tunings include major-thirds tuning, all-fourths, and all-fifths tunings. For each regular tuning, chord patterns may be diagonally shifted down the fretboard, a property that simplifies beginners' learning of chords and that simplifies advanced players' improvisation. On the other hand, in regular tunings 6-string chords (in the keys of C, G, and D) are more difficult to play.
Open tuning refers to a guitar tuned so that strumming the open strings produces a chord, typically a major chord. The base chord consists of at least 3 notes and may include all the strings or a subset. The tuning is named for the open chord, Open D, open G, and open A are popular tunings. All similar chords in the chromatic scale can then be played by barring a single fret.[16] Open tunings are common in blues and folk music,[17] and they are used in the playing of slide and bottleneck guitars.[16][18] Many musicians use open tunings when playing slide guitar.[17]
The neck joint or heel is the point at which the neck is either bolted or glued to the body of the guitar. Almost all acoustic steel-string guitars, with the primary exception of Taylors, have glued (otherwise known as set) necks, while electric guitars are constructed using both types. Most classical guitars have a neck and headblock carved from one piece of wood, known as a "Spanish heel." Commonly used set neck joints include mortise and tenon joints (such as those used by C. F. Martin & Co.), dovetail joints (also used by C. F. Martin on the D-28 and similar models) and Spanish heel neck joints, which are named after the shoe they resemble and commonly found in classical guitars. All three types offer stability.
Português: Tocar Acordes de Guitarra, Español: tocar acordes de guitarra, Deutsch: Akkorde auf der Gitarre spielen, Italiano: Suonare gli Accordi con la Chitarra, Français: jouer des accords à la guitare, Русский: играть аккорды на гитаре, 中文: 弹吉他和弦, Nederlands: Gitaarakkoorden spelen, हिन्दी: गिटार बजाएँ, Tiếng Việt: Chơi Hợp âm Ghita, ไทย: จับคอร์ดกีตาร์, 日本語: ギターでコードを弾く, العربية: عزف كوردات الجيتار
Flatwound strings have a flat surface. These strings are very popular among jazz guitarists because they have a very dark and understated tone. However, they are also more difficult to play. These strings are not a good fit for rock or blues, because they’re stiffness and dark tone means that it’s hard to cut through the mix and pull off the fast and intricate runs and bends that define blues, rock, and metal.
We believe that music is a social activity so we present students with numerous opportunities to interact with each other. Each year we hold multiple recitals which offer a low-pressure opportunity to perform in front of an audience with other like-minded music students.  In addition to recitals, students frequently go out into the community to perform outreach concerts at local hospitals, schools, and nursing homes. Students also have the option to join group classes at our Santa Clara location. This offers students a chance to perform for each other more frequently, as well as join on our many performance ensembles. 
Inlays are visual elements set into the exterior surface of a guitar, both for decoration and artistic purposes and, in the case of the markings on the 3rd, 5th, 7th and 12th fret (and in higher octaves), to provide guidance to the performer about the location of frets on the instrument. The typical locations for inlay are on the fretboard, headstock, and on acoustic guitars around the soundhole, known as the rosette. Inlays range from simple plastic dots on the fretboard to intricate works of art covering the entire exterior surface of a guitar (front and back). Some guitar players have used LEDs in the fretboard to produce unique lighting effects onstage. Fretboard inlays are most commonly shaped like dots, diamond shapes, parallelograms, or large blocks in between the frets.
Kyser®'s 92/8 phosphor bronze acoustic strings quickly settle in to give your guitar a warm, bright, and well balanced tone. They are precision wound with a corrosion resistant blend of 92% copper and 8% tin phosphide onto a carefully drawn hex shaped high carbon steel core. The result is a long lasting, even tone, with excellent intonation. Click the individual string images to view more gauge information.
Piezoelectric, or piezo, pickups represent another class of pickup. These employ piezoelectricity to generate the musical signal and are popular in hybrid electro-acoustic guitars. A crystal is located under each string, usually in the saddle. When the string vibrates, the shape of the crystal is distorted, and the stresses associated with this change produce tiny voltages across the crystal that can be amplified and manipulated.
With the C major chord, put that shape on the guitar for thirty seconds, take it off, shake it out, and repeat the process a few times. As you’re making the shape, remember to come right behind the frets on the tips of your fingers. When you’re starting out, you may have to place each finger down one at a time, but that’s natural. You’ll get better with time and eventually be able to go right to the chord.
Artistworks is a great concept. I am a pupil of rock guitarist Paul Gilbert! Let me say that again - I am a pupil of rock guitarist Paul Gilbert! Yes, THE Paul Gilbert! The idea that top notch, internationally recognised musicians are teaching you from the comfort of your own home, is still amazing to me. And they speak to YOU. They tailor their feedback to you and your level. Your playing will improve immeasurably. So, what are you waiting for? Do it now before we all wake up and it turns out to be a dream after all.
Though they may not be as exciting of a topic as instruments or amplifiers, choosing the right type of strings for your guitar is incredibly important. Guitar strings have different responses and different feels, and when the right type of string is used it’s a huge asset to your playing. Likewise, when the wrong type of string is used it can be incredibly detrimental.
Anyone playing and/or teaching guitar needs staff paper, blank tab, guitar chord charts, guitar scale charts, and fretboard diagrams to chart their guitar lessons and musical ideas. You can find books with some combination of these blank charts and grids, but you can’t find one with all of them organized in a practical way. That’s why we chose to design our own.
Fretboards are most commonly made of rosewood, ebony, maple, and sometimes manufactured using composite materials such as HPL or resin. See the section "Neck" below for the importance of the length of the fretboard in connection to other dimensions of the guitar. The fingerboard plays an essential role in the treble tone for acoustic guitars. The quality of vibration of the fingerboard is the principal characteristic for generating the best treble tone. For that reason, ebony wood is better, but because of high use, ebony has become rare and extremely expensive. Most guitar manufacturers have adopted rosewood instead of ebony.
We were privileged to have worked with hundreds of top artists and educators who authored the original magazine articles and then recorded audio lessons in their own studios. While video is the medium of choice today, these 1,200+ audio lessons still deliver amazing instruction from some of the best in the biz — perfect for those long drives and commutes!
The guitar is a type of chordophone, traditionally constructed from wood and strung with either gut, nylon or steel strings and distinguished from other chordophones by its construction and tuning. The modern guitar was preceded by the gittern, the vihuela, the four-course Renaissance guitar, and the five-course baroque guitar, all of which contributed to the development of the modern six-string instrument.
Open tuning refers to a guitar tuned so that strumming the open strings produces a chord, typically a major chord. The base chord consists of at least 3 notes and may include all the strings or a subset. The tuning is named for the open chord, Open D, open G, and open A are popular tunings. All similar chords in the chromatic scale can then be played by barring a single fret.[16] Open tunings are common in blues and folk music,[17] and they are used in the playing of slide and bottleneck guitars.[16][18] Many musicians use open tunings when playing slide guitar.[17]
Jake Jackson's publications, as writer, editor or contributor, include The Beginner's Guide to Reading Music, How to Play Classic Riffs and Play Flamenco. As guitarist and songwriter he has been in a few bands, including Slice, The Harmonics and Starbank and has studied a form of Flamenco guitar. Although Jake has a range of fine guitars in his house his favourite music software is Sibelius and, having worked with Cubase for many years, is now moving over to Logic Pro.

Also, while coated strings do last longer than non-coated strings they’re also significantly more expensive. Personally, I find that coated strings last roughly twice as long as non-coated alternatives. Since they’re also about twice as expensive, I personally don’t save any money using coated strings. However, depending on how acidic your sweat is your experience may vary.

In major-thirds tuning, the interval between open strings is always a major third. Consequently, four frets suffice to play the chromatic scale. Chord inversion is especially simple in major-thirds tuning. Chords are inverted simply by raising one or two notes by three strings. The raised notes are played with the same finger as the original notes.[22][23] In contrast, in standard tuning, the shape of inversions depends on the involvement of the irregular major-third.[24]

Whether you just started guitar lessons or you've been playing for a while, you may be itching to learn some new songs and take on some new challenges. You might be wondering: where can I go from here? That's where alternate guitar tunings come in! With this guide from Michael L., you'll learn how alternate guitar tunings can take your playing to the next level... One of the amazing things about the guitar is its versatility. Not only can you play rhythm and/or melody in different genres,
The electric guitar initially met with skepticism from traditionalists, but country and blues players and jazz instrumentalists soon took to the variety of new tones and sounds that the electric guitar could produce, exploring innovative ways to alter, bend and sustain notes. The instrument's volume and tones proved particularly appealing to the enthusiasts of rock and roll in the 1950s.