All three principal types of resonator guitars were invented by the Slovak-American John Dopyera (1893–1988) for the National and Dobro (Dopyera Brothers) companies. Similar to the flat top guitar in appearance, but with a body that may be made of brass, nickel-silver, or steel as well as wood, the sound of the resonator guitar is produced by one or more aluminum resonator cones mounted in the middle of the top. The physical principle of the guitar is therefore similar to the loudspeaker.

Piezoelectric, or piezo, pickups represent another class of pickup. These employ piezoelectricity to generate the musical signal and are popular in hybrid electro-acoustic guitars. A crystal is located under each string, usually in the saddle. When the string vibrates, the shape of the crystal is distorted, and the stresses associated with this change produce tiny voltages across the crystal that can be amplified and manipulated.
Fretboards are most commonly made of rosewood, ebony, maple, and sometimes manufactured using composite materials such as HPL or resin. See the section "Neck" below for the importance of the length of the fretboard in connection to other dimensions of the guitar. The fingerboard plays an essential role in the treble tone for acoustic guitars. The quality of vibration of the fingerboard is the principal characteristic for generating the best treble tone. For that reason, ebony wood is better, but because of high use, ebony has become rare and extremely expensive. Most guitar manufacturers have adopted rosewood instead of ebony.
Archtop guitars are steel-string instruments in which the top (and often the back) of the instrument are carved, from a solid billet, into a curved, rather than a flat, shape. This violin-like construction is usually credited to the American Orville Gibson. Lloyd Loar of the Gibson Mandolin-Guitar Mfg. Co introduced the violin-inspired "F"-shaped hole design now usually associated with archtop guitars, after designing a style of mandolin of the same type. The typical archtop guitar has a large, deep, hollow body whose form is much like that of a mandolin or a violin-family instrument. Nowadays, most archtops are equipped with magnetic pickups, and they are therefore both acoustic and electric. F-hole archtop guitars were immediately adopted, upon their release, by both jazz and country musicians, and have remained particularly popular in jazz music, usually with flatwound strings.

The Master of Music in Performance (Guitar) from Musicians Institute combines advanced performance training with additional study in both traditional and contemporary disciplines such as music history, theory, education, research skills, recording technology, production, business relations and online brand management, taking your guitar skills to the highest level.

Stacking the C-major scale with thirds creates a chord progression  Play (help·info), traditionally enumerated with the Roman numerals I, ii, iii, IV, V, vi, viio. Its major-key sub-progression C-F-G (I-IV-V) is conventional in popular music. In this progression, the minor triads ii-iii-vi appear in the relative minor key (Am)'s corresponding chord progression.

I've been with Artistworks for four years and plan on sticking around for some time to come. I've tried three different schools with them and each one offers exceptionally high quality video lessons. Support from the instructor is always first rate too. Being able to send a video to your instructor and receive a personalised video reponse is incredible. Forums and peer support add to the experience. Some of the website functionality is a bit shaky but the quality of instruction compensates for this. I would highly recommend Artistworks. I love it.

The sound of an acoustic guitar is arguably the most well known in all of modern popular music. Without electronic components, the guitar relies solely on the interaction between the strings and the sound box to produce every note. Because of this, the strings of your acoustic guitar can significantly influence its sound. To get the most out of your guitar, keep an eye on the condition of the strings. You don't need to wait until your strings break to replace them. When they get old enough that their tone starts to change, it's time to re-string. Depending on the guitar, you may choose either nylon or metal strings. Nylon strings are the modern substitute for gut strings, so they're usually found on older styles of guitar such as baroque or flamenco. If you play the classical guitar, take care to fit it with the correct strings: since classical guitars are sized and tensioned differently from other varieties of acoustic guitar, they can be damaged by standard strings. Similarly, classical guitar strings won't work with other guitars. For metal-stringed guitars, there are several options available, each with its own acoustic character. The three most common types of metal strings are bronze, phosphor-bronze and silk-and-steel. The staple string for many guitarists, bronze produces a bright, quickly-fading tone that's lively and well-suited to any style of music. Phosphor-bronze is similar, but with added warmth and longer sustain. For a completely different sound, consider silk-and-steel. These strings create a tone that's gentle and mellow. Lower in tension and available in lighter gauges, silk-and-steel strings are easier to play and are great for vintage guitars that need special strings. It's also important to keep in mind the gauge of the strings you're choosing. Higher gauges are thicker, producing increased volume and extended sustain with an overall warmer tone. The trade-off of the rich overtones of heavy-gauge strings is that they are more challenging to play, requiring more force to fret, pick and strum. If you are an experienced guitarist, you likely have a preferred gauge already. If you're a beginner, it's a good idea to start with a lighter gauge to make the learning curve more forgiving. In the end, the right combination of material and gauge is a matter of personal preference. You may need to try several different acoustic guitar strings before you find the perfect ones for you, but the results will certainly be worth it.

The next step is to figure out what gauge, or thickness of string is best suited to your playing ability and style. Thinner gauges are easier to fret and bend, and may be better suited for beginners, until callouses build up on the fingertips. Heavier strings tend to produce greater volume and fuller tone. Nylon strings are typically categorized as light, medium or heavy tension. Steel strings for both electric and acoustic guitars are categorized by the gauge, or thickness of the lightest string, the high E string, measured in thousandths of an inch, with .09 being a common size for an electric set. A set of electric strings may be labeled .09-.042 - this is the gauge of the lightest and heaviest string in the set. Acoustic sets are a little thicker, so a typical medium-gauge set might be .012-.054.
A guitar strap is a strip of material with an attachment mechanism on each end, made to hold a guitar via the shoulders at an adjustable length. Guitars have varying accommodations for attaching a strap. The most common are strap buttons, also called strap pins, which are flanged steel posts anchored to the guitar with screws. Two strap buttons come pre-attached to virtually all electric guitars, and many steel-string acoustic guitars. Strap buttons are sometimes replaced with "strap locks", which connect the guitar to the strap more securely.
Picks come in many shapes and sizes. Picks vary from the small jazz pick to the large bass pick. The thickness of the pick often determines its use. A thinner pick (between 0.2 and 0.5 mm) is usually used for strumming or rhythm playing, whereas thicker picks (between 0.7 and 1.5+ mm) are usually used for single-note lines or lead playing. The distinctive guitar sound of Billy Gibbons is attributed to using a quarter or peso as a pick. Similarly, Brian May is known to use a sixpence coin as a pick, while noted 1970s and early 1980s session musician David Persons is known for using old credit cards, cut to the correct size, as plectrums.

The saddle of a guitar refers to the part of the bridge that physically supports the strings. It may be one piece (typically on acoustic guitars) or separate pieces, one for each string (electric guitars and basses). The saddle's basic purpose is to provide the end point for the string's vibration at the correct location for proper intonation, and on acoustic guitars to transfer the vibrations through the bridge into the top wood of the guitar. Saddles are typically made of plastic or bone for acoustic guitars, though synthetics and some exotic animal tooth variations (e.g. fossilized tooth, ivory, etc. ) have become popular with some players. Electric guitar saddles are typically metal, though some synthetic saddles are available.

Bolt-on necks, though they are historically associated with cheaper instruments, do offer greater flexibility in the guitar's set-up, and allow easier access for neck joint maintenance and repairs. Another type of neck, only available for solid body electric guitars, is the neck-through-body construction. These are designed so that everything from the machine heads down to the bridge are located on the same piece of wood. The sides (also known as wings) of the guitar are then glued to this central piece. Some luthiers prefer this method of construction as they claim it allows better sustain of each note. Some instruments may not have a neck joint at all, having the neck and sides built as one piece and the body built around it.
Learning guitar is a lot of fun, and with the right lessons anyone can become a great guitar player. However, to be successful it's important to pick the right learning method and stay focused. We designed our Core Learning System to be a step-by-step system that keeps beginners on-track and having fun. Give it a try today by becoming a Full Access member.
Peterson, Jonathon (2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72 (Winter): 36–43. ISSN 1041-7176. Archived from the original on 21 October 2011. Retrieved 9 October 2012.
Justin Sandercoe has thought long and hard about how to teach people to play the guitar, and how to do this over the internet. He has come up with a well-designed series of courses that will take you from nowhere to proficiency. I tried to learn how to play years ago, using books, and got nowhere. I've been using Justin's site for just over a year and I feel I've made real progress. What's more, Justin offers his lessons for free - a boon for any young player who has the urge to play, but whose pockets are empty. I've seen and used other sites for learners: none of them offer as clearly marked a road as Justin does.
The intensive A.A. curriculum prepares musicians to perform in any professional situation, along with learning professional development skills such as basic computer use, EPK creation, resume and bio writing, and social media as a tool for business and networking. The Associate of Arts Degree is intended to equip students with the knowledge and training needed to become professional performers in today’s music industry.