As stated above, construction has just as much of an impact on a guitar’s tone as material. The factors that make up construction are as follows: gauge, string core, winding type, and string coating. And while these factors are all important, keep in mind that different companies use different approaches to all of them. So never be afraid to try out a variety brands, because while the strings may look the same you will get a different response.
The truss rod is a thin, strong metal rod that runs along the inside of the neck. It is used to correct changes to the neck's curvature caused by aging of the neck timbers, changes in humidity, or to compensate for changes in the tension of strings. The tension of the rod and neck assembly is adjusted by a hex nut or an allen-key bolt on the rod, usually located either at the headstock, sometimes under a cover, or just inside the body of the guitar underneath the fretboard and accessible through the sound hole. Some truss rods can only be accessed by removing the neck. The truss rod counteracts the immense amount of tension the strings place on the neck, bringing the neck back to a straighter position. Turning the truss rod clockwise tightens it, counteracting the tension of the strings and straightening the neck or creating a backward bow. Turning the truss rod counter-clockwise loosens it, allowing string tension to act on the neck and creating a forward bow.
Some piezo-equipped guitars use a hexaphonic pickup. "Hex" is a prefix meaning six. A hexaphonic pickup produces a separate output for each string, usually from a discrete piezoelectric or magnetic pickup for each string. This arrangement lets on-board or external electronics process the strings individually for modeling or Musical Instrument Digital Interface (MIDI) conversion. Roland makes hexaphonic pickups for guitar and bass, and a line of guitar modeling and synthesis products. Line 6's hexaphonic-equipped Variax guitars use on-board electronics to model the sound after various vintage instruments, and vary pitch on individual strings.
What ultimately sets these rock guitar lessons apart from other offerings is the ability to submit a video for review using the ArtistWorks Video Exchange Learning® platform. Paul reviews each submission and records a video response, offering specific guidance to take your guitar playing to the next level. All students can access the Video Exchange library and watch each other’s interactions with Paul. This library is constantly expanding and may contain the key to unlock your playing.
Do you play a warm-up exercise when you practice guitar? Guitar teacher Kirk R. shares three guitar exercises that are perfect for players at all levels... There are literally thousands of exercises and studies for the guitar. There are some that are great for beginners who are just getting used to having their fingers on the guitar, and some that are designed to challenge and grow the technique of seasoned players. But who has time to learn thousands of guitar exercises, even over man
Once you know the basic chords, it might be easier to think of them the way the function inside a key. For example, when in the key of E, the E (I) is called the Tonic. It's what all the other chords want to get to—which is what helps give western music its sense of motion. The A (IV) in the key of E functions as the Subdominant—it's sort of a passive in-between, just as happy to continue forward, as to relax back to the Tonic. The Dominant is just what it sounds like: it leads you where it wants to go. In the key of E, that role is filled by the B (V), and will definitely make your brain want to get back to the Tonic! When you get more familiar with the chords, and want to sketch out a tune, try writing it as I-IV-V (or variations of that) instead of E-A-B. It will make it much easier to transpose when you find out your singer cannot sing in the original key!
The main purpose of the bridge on an acoustic guitar is to transfer the vibration from the strings to the soundboard, which vibrates the air inside of the guitar, thereby amplifying the sound produced by the strings. On all electric, acoustic and original guitars, the bridge holds the strings in place on the body. There are many varied bridge designs. There may be some mechanism for raising or lowering the bridge saddles to adjust the distance between the strings and the fretboard (action), or fine-tuning the intonation of the instrument. Some are spring-loaded and feature a "whammy bar", a removable arm that lets the player modulate the pitch by changing the tension on the strings. The whammy bar is sometimes also called a "tremolo bar". (The effect of rapidly changing pitch is properly called "vibrato". See Tremolo for further discussion of this term.) Some bridges also allow for alternate tunings at the touch of a button.
Musicians Institute programs are fast paced and certain fundamental musical skills are required before you can begin your program. If you meet entry requirements and are accepted, a one-on-one performance evaluation and placement testing will be held during registration to determine whether you qualify for advanced placement in any area of course work. You are evaluated based on the content of your submission. For more info, please see the MI Course Catalog.
The Master of Music in Performance (Guitar) from Musicians Institute combines advanced performance training with additional study in both traditional and contemporary disciplines such as music history, theory, education, research skills, recording technology, production, business relations and online brand management, taking your guitar skills to the highest level.