We believe that music is a social activity so we present students with numerous opportunities to interact with each other. Each year we hold multiple recitals which offer a low-pressure opportunity to perform in front of an audience with other like-minded music students.  In addition to recitals, students frequently go out into the community to perform outreach concerts at local hospitals, schools, and nursing homes. Students also have the option to join group classes at our Santa Clara location. This offers students a chance to perform for each other more frequently, as well as join on our many performance ensembles.
Flat-top or steel-string guitars are similar to the classical guitar, however, within the varied sizes of the steel-stringed guitar the body size is usually significantly larger than a classical guitar, and has a narrower, reinforced neck and stronger structural design. The robust X-bracing typical of the steel-string was developed in the 1840s by German-American luthiers, of whom Christian Friedrich "C. F." Martin is the best known. Originally used on gut-strung instruments, the strength of the system allowed the guitar to withstand the additional tension of steel strings when this fortunate combination arose in the early 20th century. The steel strings produce a brighter tone, and according to many players, a louder sound. The acoustic guitar is used in many kinds of music including folk, country, bluegrass, pop, jazz, and blues. Many variations are possible from the roughly classical-sized OO and Parlour to the large Dreadnought (the most commonly available type) and Jumbo. Ovation makes a modern variation, with a rounded back/side assembly molded from artificial materials.
The Guitar Center Lessons curriculum is based on a progressive advancement model. This proven method provides a well-defined roadmap of the material covered and skills taught so you can easily track your past and future progress. Since we use the same curriculum in all locations, students have the flexibility to take lessons from any instructor at any of our locations and progress through the same content. Our program is fun but challenging–both for beginners and serious musicians who want to improve their existing chops.
{"reportSuiteIds":"guitarcenterprod","pageName":"[gc] services:lessons","prop2":"[gc] services:lessons","prop1":"[gc] services","prop5":"[gc] services:lessons","prop6":"[gc] services:lessons","prop3":"[gc] services:lessons","evar51":"default: united states","prop4":"[gc] services:lessons","campaign":"gcdirectsourcecode1","channel":"[gc] services","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] services"}
Almost all guitars have frets, which are metal strips (usually nickel alloy or stainless steel) embedded along the fretboard and located at exact points that divide the scale length in accordance with a specific mathematical formula. The exceptions include fretless bass guitars and very rare fretless guitars. Pressing a string against a fret determines the strings' vibrating length and therefore its resultant pitch. The pitch of each consecutive fret is defined at a half-step interval on the chromatic scale. Standard classical guitars have 19 frets and electric guitars between 21 and 24 frets, although guitars have been made with as many as 27 frets. Frets are laid out to accomplish an equal tempered division of the octave. Each set of twelve frets represents an octave. The twelfth fret divides the scale length exactly into two halves, and the 24th fret position divides one of those halves in half again.
Bolt-on necks, though they are historically associated with cheaper instruments, do offer greater flexibility in the guitar's set-up, and allow easier access for neck joint maintenance and repairs. Another type of neck, only available for solid body electric guitars, is the neck-through-body construction. These are designed so that everything from the machine heads down to the bridge are located on the same piece of wood. The sides (also known as wings) of the guitar are then glued to this central piece. Some luthiers prefer this method of construction as they claim it allows better sustain of each note. Some instruments may not have a neck joint at all, having the neck and sides built as one piece and the body built around it.
YellowBrickCinema composes Sleep Music, Study Music and Focus Music, Relaxing Music, Meditation Music (including Tibetan Music and Shamanic Music), Healing Music, Reiki Music, Zen Music, Spa Music and Massage Music, Instrumental Music (including Piano Music, Guitar Music and Flute Music) and Yoga Music. We also produce music videos with Classical Music from composers such as Mozart, Beethoven and Bach.
Only two or three frets are needed for the guitar chords—major, minor, and dominant sevenths—which are emphasized in introductions to guitar-playing and to the fundamentals of music.[87][88] Each major and minor chord can be played on exactly two successive frets on exactly three successive strings, and therefore each needs only two fingers. Other chords—seconds, fourths, sevenths, and ninths—are played on only three successive frets.[89]
On the other hand, some chords are more difficult to play in a regular tuning than in standard tuning. It can be difficult to play conventional chords especially in augmented-fourths tuning and all-fifths tuning,[20] in which the large spacings require hand stretching. Some chords, which are conventional in folk music, are difficult to play even in all-fourths and major-thirds tunings, which do not require more hand-stretching than standard tuning.[21]
The standard guitar has six strings, but four-, seven-, eight-, nine-, ten-, eleven-, twelve-, thirteen- and eighteen-string guitars are also available. Classical and flamenco guitars historically used gut strings, but these have been superseded by polymer materials, such as nylon and fluorocarbon. Modern guitar strings are constructed from metal, polymers, or animal or plant product materials. Instruments utilizing "steel" strings may have strings made from alloys incorporating steel, nickel or phosphor bronze. Bass strings for both instruments are wound rather than monofilament.
We believe that music is a social activity so we present students with numerous opportunities to interact with each other. Each year we hold multiple recitals which offer a low-pressure opportunity to perform in front of an audience with other like-minded music students.  In addition to recitals, students frequently go out into the community to perform outreach concerts at local hospitals, schools, and nursing homes. Students also have the option to join group classes at our Santa Clara location. This offers students a chance to perform for each other more frequently, as well as join on our many performance ensembles.
{"eVar4":"shop: guitars","pageName":"[mf] shop: guitars","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[mf] shop: guitars","prop1":"[mf] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitars","prop5":"[mf] shop: guitars","prop6":"[mf] shop: guitars","prop3":"[mf] shop: guitars","prop4":"[mf] shop: guitars","campaign":"directsourcecode2","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] category"}
This is a thick little book with nice big chord diagrams and shows chords in various positions. I like that it is spiral bound. The only thing missing is tabs for the letter sections so that you an easily flip to the letter note/chord you're searching for rather than having to turn a lot of pages to get to what you want. I plan to put in my own divider tabs.
A guitar's frets, fretboard, tuners, headstock, and truss rod, all attached to a long wooden extension, collectively constitute its neck. The wood used to make the fretboard usually differs from the wood in the rest of the neck. The bending stress on the neck is considerable, particularly when heavier gauge strings are used (see Tuning), and the ability of the neck to resist bending (see Truss rod) is important to the guitar's ability to hold a constant pitch during tuning or when strings are fretted. The rigidity of the neck with respect to the body of the guitar is one determinant of a good instrument versus a poor-quality one.

#### So, what should you look for in a set of strings? There's no one answer. To go back to those same analogies: every woodwind player has a preferred strength and shape of reed, and every drummer likes a set of sticks with particular balance and tip shape. It's the same with strings: you've got different gauges and different materials to choose from, and ultimately the right ones for you are a matter of preference.

Only two or three frets are needed for the guitar chords—major, minor, and dominant sevenths—which are emphasized in introductions to guitar-playing and to the fundamentals of music.[87][88] Each major and minor chord can be played on exactly two successive frets on exactly three successive strings, and therefore each needs only two fingers. Other chords—seconds, fourths, sevenths, and ninths—are played on only three successive frets.[89]
When all is said and done, the only way to know for sure what a certain set of strings will sound like on your guitar is to take them for a spin. For that reason, it's not a bad idea to try out a few different ones that interest you to see which ones you like best - then you can stock up! However you like to approach your string shopping, the amazing selection you'll find here is sure to satisfy.
In an acoustic instrument, the body of the guitar is a major determinant of the overall sound quality. The guitar top, or soundboard, is a finely crafted and engineered element made of tonewoods such as spruce and red cedar. This thin piece of wood, often only 2 or 3 mm thick, is strengthened by differing types of internal bracing. Many luthiers consider the top the dominant factor in determining the sound quality. The majority of the instrument's sound is heard through the vibration of the guitar top as the energy of the vibrating strings is transferred to it. The body of an acoustic guitar has a sound hole through which sound projects. The sound hole is usually a round hole in the top of the guitar under the strings. Air inside the body vibrates as the guitar top and body is vibrated by the strings, and the response of the air cavity at different frequencies is characterized, like the rest of the guitar body, by a number of resonance modes at which it responds more strongly.
The hardest thing about playing chords when you get started is changing between them. To effectively change between chords, you need to be economical with your movements. Spend a bit of time thinking about where your fingers need to be for each chord, and work out the most efficient way to move from one to the other. For example, from a C major, you can flatten your index finger so it covers the first string too and move your middle and ring fingers both down a string to switch to an F. Easy changes to start with are between C major and A minor and G major and E minor.
Kyser®'s nickel-plated electric guitar strings give you a warm, rich, full sound. They are precision wound around a carefully drawn hex shaped carbon steel core. The outer nickel-plated wrap maintains constant contact with the hex core resulting in a string that vibrates evenly for maximum sustain, smooth sound, and allows easy bending. Click the individual string images to view more gauge information.
I bought this because I wanted to learn more AC/DC songs note for note as they're fun and not overly complicated. This book doesn't disappoint. With the little time I've had to practice so far, this book's been a great help, and for a lot cheaper than most song books. For best accuracy it helps to listen to the songs too. My only gripe is "Have a Drink on Me" isn't included.

Justin is an instructor with that rare combination that encompasses great playing in conjunction with a thoughtful, likable personality. Justin's instruction is extremely intelligent because he's smart enough to know the 'basics' don't have to be served 'raw' - Justin keenly serves the information covered in chocolate. Justin's site is like a free pass in a candy store!
Ernie Ball is the world's leading manufacturer of premium electric, acoustic, and classical guitar strings, bass strings, mandolin, banjo, pedal steel strings and guitar accessories. Our strings have been played on many of the best-selling albums of all time and are used by some of history’s greatest musicians including Paul McCartney, Eric Clapton, Jimmy Page, Slash, The Rolling Stones, Angus Young, Eagles, Jeff Beck, Pete Townshend, Aerosmith, Metallica, and more.
Our highly-trained professional instructors teach guitar lessons to beginners starting with the fundamentals, including scales, chords, tuning, arpeggios and rhythm. They then use famous rock songs to help guide guitar students through the early stages of musical development. Our beginner guitar lessons inspire creativity and help develop new students into world-class players with weekly private guitar lessons and group rehearsals. School of Rock's core philosophy is that the best way for students to gain musical proficiency is through performance-based music education. All of our lessons for guitar students include a performance aspect.
Play each note of the chord one after another (known as playing an arpeggio) to check if any are being accidently muted or need pressing down harder. If you find that you're accidently muting a string with one of your fingers, try lowering your thumb so the tip reaches around half way up the back of the guitar neck. This gives your fingers a better angle to approach the fretboard.
The horizontal lines represent the frets on the guitar and the vertical lines represent the strings. The numbers listed let you know what fret number it is referring too. If there is an X it means don't play that string and if there is a 0 it means to play that string but do not press down on it anywhere. The black circles show you where to press down.
The ratio of the spacing of two consecutive frets is {\displaystyle {\sqrt[{12}]{2}}} (twelfth root of two). In practice, luthiers determine fret positions using the constant 17.817—an approximation to 1/(1-1/ {\displaystyle {\sqrt[{12}]{2}}} ). If the nth fret is a distance x from the bridge, then the distance from the (n+1)th fret to the bridge is x-(x/17.817).[15] Frets are available in several different gauges and can be fitted according to player preference. Among these are "jumbo" frets, which have much thicker gauge, allowing for use of a slight vibrato technique from pushing the string down harder and softer. "Scalloped" fretboards, where the wood of the fretboard itself is "scooped out" between the frets, allow a dramatic vibrato effect. Fine frets, much flatter, allow a very low string-action, but require that other conditions, such as curvature of the neck, be well-maintained to prevent buzz.

Kyser®'s 92/8 phosphor bronze acoustic strings quickly settle in to give your guitar a warm, bright, and well balanced tone. They are precision wound with a corrosion resistant blend of 92% copper and 8% tin phosphide onto a carefully drawn hex shaped high carbon steel core. The result is a long lasting, even tone, with excellent intonation. Click the individual string images to view more gauge information.

The black dots found on the chord diagrams tell you which fret to press down, and on which string and with which numbered finger. Additionally, you will sometimes see circles above the nut. These circles tell you to play that open string without pressing any fret. So using what we know so far about strings, finger numbers, and dots, let’s check out that same chord diagram again:


{ "items": 1, "margin": 0, "loop":true, "dots":true, "lazyLoad":true, "autoplayHoverPause":true, "navElement": "div", "nav": false, "itemElement": "li", "stageElement": "ul" //"jqueryLazyLoad": true, //"jqueryLazyLoadOptions": { "effect": "fadeIn", "skip_invisible": false, "threshold": 300 }, //"autoplayHoverPause":true, //"responsive":{ "0":{ "items":5 }, "1158":{ "items":6 }, "1340":{ "items":7 }, "1500":{ "items":8 } } }


Adjusting the truss rod affects the intonation of a guitar as well as the height of the strings from the fingerboard, called the action. Some truss rod systems, called double action truss systems, tighten both ways, pushing the neck both forward and backward (standard truss rods can only release to a point beyond which the neck is no longer compressed and pulled backward). The artist and luthier Irving Sloane pointed out, in his book Steel-String Guitar Construction, that truss rods are intended primarily to remedy concave bowing of the neck, but cannot correct a neck with "back bow" or one that has become twisted.[page needed] Classical guitars do not require truss rods, as their nylon strings exert a lower tensile force with lesser potential to cause structural problems. However, their necks are often reinforced with a strip of harder wood, such as an ebony strip that runs down the back of a cedar neck. There is no tension adjustment on this form of reinforcement.
The Master of Music in Performance (Guitar) from Musicians Institute combines advanced performance training with additional study in both traditional and contemporary disciplines such as music history, theory, education, research skills, recording technology, production, business relations and online brand management, taking your guitar skills to the highest level.