Fretboards are most commonly made of rosewood, ebony, maple, and sometimes manufactured using composite materials such as HPL or resin. See the section "Neck" below for the importance of the length of the fretboard in connection to other dimensions of the guitar. The fingerboard plays an essential role in the treble tone for acoustic guitars. The quality of vibration of the fingerboard is the principal characteristic for generating the best treble tone. For that reason, ebony wood is better, but because of high use, ebony has become rare and extremely expensive. Most guitar manufacturers have adopted rosewood instead of ebony.
Ze first began his journey playing original music and top 40s pop tunes around the country's popular venues. Eventually, through the music of John Mayer, he found a strong attraction to blues music. Ze has years of experience teaching beginners and intermediate guitarists. Currently with Liberty Park Music he is teaching Introduction to Guitar Playing for Complete Beginners, Rhythm Guitar to learn about strumming, chords and more, Guitar Essentials as a fast-track review course, and lots of Song Lessons on pop and rock hits.
All courses are available as instant downloads, on disc, or as streaming video on our website and mobile apps for iOS and Android. Study anywhere, anytime in the format of your choice. Interactive features and functions include standard notation, Power Tab, Guitar Pro, jam tracks, playback controls, video looping, slow-mo, tuner, metronome and other learning tools.
Another class of alternative tunings are called drop tunings, because the tuning drops down the lowest string. Dropping down the lowest string a whole tone results in the "drop-D" (or "dropped D") tuning. Its open-string notes DADGBE (from low to high) allow for a deep bass D note, which can be used in keys such as D major, d minor and G major. It simplifies the playing of simple fifths (powerchords). Many contemporary rock bands re-tune all strings down, making, for example, Drop-C or Drop-B tunings.
The standard guitar has six strings, but four-, seven-, eight-, nine-, ten-, eleven-, twelve-, thirteen- and eighteen-string guitars are also available. Classical and flamenco guitars historically used gut strings, but these have been superseded by polymer materials, such as nylon and fluorocarbon. Modern guitar strings are constructed from metal, polymers, or animal or plant product materials. Instruments utilizing "steel" strings may have strings made from alloys incorporating steel, nickel or phosphor bronze. Bass strings for both instruments are wound rather than monofilament.
Welcome to video eight in the Beginner Guitar Quick-Start Series. In this lesson, we’re going to go through your first two chords. You’ll learn A minor 7 and C major. These two guitar chords will be useful for you because you’ll be using them often through your guitar career. A minor 7 is good to start with because it is fairly easy, and C major is great chord to learn how to play clean sounding chords.
As stated above, construction has just as much of an impact on a guitar’s tone as material. The factors that make up construction are as follows: gauge, string core, winding type, and string coating. And while these factors are all important, keep in mind that different companies use different approaches to all of them. So never be afraid to try out a variety brands, because while the strings may look the same you will get a different response.

Only two or three frets are needed for the guitar chords—major, minor, and dominant sevenths—which are emphasized in introductions to guitar-playing and to the fundamentals of music.[87][88] Each major and minor chord can be played on exactly two successive frets on exactly three successive strings, and therefore each needs only two fingers. Other chords—seconds, fourths, sevenths, and ninths—are played on only three successive frets.[89]

First off, there are two more techniques I want to talk about. These are fret placement and finger posture. Place your first finger on the first fret of the B string. For fret placement, you’ll want to have your finger right behind the fret. In the video, you can see that the further away from the fret I place my finger, the more buzz the note has.

There's no other instrument with as much presence and cultural identity as the guitar. Virtually everyone is familiar with tons of different guitar sounds, from intense metal shredding to soft and jaunty acoustic folk music. And behind all those iconic guitar tones are great sets of strings. Just like a saxophonist changes reeds from time to time or a drummer replaces sticks, putting new strings on your guitar every so often is an important part of owning and playing one.

A few years back, I dusted off the ol' Takamine I got in high school to try some 'music therapy' with my disabled son, who was recovering from a massive at-birth stroke. This reignited my long dormant passion to transform myself from a beach strummer to a 'real' musician; however, as a single mom, taking in-person lessons was financially difficult. Then I found Justinguitar! Flash forward to today; my son is almost fully recovered (YAY!), my guitar collection has grown significantly, and I'm starting to play gigs. None of this would have been possible without your guidance and generosity, Justin. Thank you for being part of the journey!
In major-thirds tuning, the interval between open strings is always a major third. Consequently, four frets suffice to play the chromatic scale. Chord inversion is especially simple in major-thirds tuning. Chords are inverted simply by raising one or two notes by three strings. The raised notes are played with the same finger as the original notes.[22][23] In contrast, in standard tuning, the shape of inversions depends on the involvement of the irregular major-third.[24]

As a general rule, brass strings are always going to be brighter than bronze strings. Though, counterintuitively, many brass strings go by the moniker of “80/20” bronze. These strings are actually the one in the same. Brass, or 80/20 bronze as it’s often known, is made from 80% copper and 20% zinc. This gives the strings a bright and cutting voice, though when used on guitars that already have a prominent high-end response it can make an instrument sound thin and tinny. For best results, use brass strings on a guitar that’s an OM size or larger (so this would include OM guitars, dreadnoughts, and jumbos).
All-fourths tuning replaces the major third between the third and second strings with a fourth, extending the conventional tuning of a bass guitar. With all-fourths tuning, playing the triads is more difficult, but improvisation is simplified, because chord-patterns remain constant when moved around the fretboard. Jazz guitarist Stanley Jordan uses the all-fourths tuning EADGCF. Invariant chord-shapes are an advantage of other regular tunings, such as major-thirds and all-fifths tunings.[20]
Our Suzuki teachers are experienced in teaching CCM students as young as 3. Developed by the Japanese Violinist Shinichi Suzuki, the Suzuki method teaches music by ear before reading notes on the instrument so teachers can focus on setting up each student with correct posture and technique to ensure the student's continued success. Parental involvement is required for students under the age of 8 and before the child starts, parents are required to attend a private 3-week parent education class.
On the other hand, some chords are more difficult to play in a regular tuning than in standard tuning. It can be difficult to play conventional chords especially in augmented-fourths tuning and all-fifths tuning,[20] in which the large spacings require hand stretching. Some chords, which are conventional in folk music, are difficult to play even in all-fourths and major-thirds tunings, which do not require more hand-stretching than standard tuning.[21]
Are you stuck in a musical rut? New tunings and tricks can help you keep learning guitar in fresh, fun ways. Try one of these great tips from guitar teacher Samuel B. to breathe new life into your guitar playing... One of the first things I tell any new student is that I don't specialize in a formal discipline. If jazz or classical training is your objective, then I'm not your guy. Instead, I specialize primarily in American roots music (that which we tend to casually lump together as "folk" … Read More
As you start practicing, your fingers may be sore for a while, but that will pass with four to six weeks. One thing I want to warn you about is that new guitar players can get frustrated when they can’t play clean chords because they try to switch between chords too soon. Often, they try to switch chords before they’ve really learned and memorized each chord shape. For now, don’t worry about switching chords and just work on each shape, getting them down, and going right to them.
Play each note of the chord one after another (known as playing an arpeggio) to check if any are being accidently muted or need pressing down harder. If you find that you're accidently muting a string with one of your fingers, try lowering your thumb so the tip reaches around half way up the back of the guitar neck. This gives your fingers a better angle to approach the fretboard.
The fingerboard, also called the fretboard, is a piece of wood embedded with metal frets that comprises the top of the neck. It is flat on classical guitars and slightly curved crosswise on acoustic and electric guitars. The curvature of the fretboard is measured by the fretboard radius, which is the radius of a hypothetical circle of which the fretboard's surface constitutes a segment. The smaller the fretboard radius, the more noticeably curved the fretboard is. Most modern guitars feature a 12" neck radius, while older guitars from the 1960s and 1970s usually feature a 6-8" neck radius. Pinching a string against a fret on fretboard effectively shortens the vibrating length of the string, producing a higher pitch.
Ernie Ball is the world's leading manufacturer of premium electric, acoustic, and classical guitar strings, bass strings, mandolin, banjo, pedal steel strings and guitar accessories. Our strings have been played on many of the best-selling albums of all time and are used by some of history’s greatest musicians including Paul McCartney, Eric Clapton, Jimmy Page, Slash, The Rolling Stones, Angus Young, Eagles, Jeff Beck, Pete Townshend, Aerosmith, Metallica, and more.
As already stated, the perfect-fifths (P5) interval is the most harmonious, after the unison and octave intervals. An explanation of human perception of harmony relates the mechanics of a vibrating string to the musical acoustics of sound waves using the harmonic analysis of Fourier series. When a string is struck with a finger or pick (plectrum), it vibrates according to its harmonic series. When an open-note C-string is struck, its harmonic series begins with the terms (C,C,G,C,E,G,B♭,C). The root note is associated with a sequence of intervals, beginning with the unison interval (C,C), the octave interval (C,C), the perfect fifth (C,G), the perfect fourth (G,C), and the major third (C,E). In particular, this sequence of intervals contains the thirds of the C-major chord {(C,E),(E,G)}.[4]

The original purpose of the resonator was to produce a very loud sound; this purpose has been largely superseded by electrical amplification, but the resonator guitar is still played because of its distinctive tone. Resonator guitars may have either one or three resonator cones. The method of transmitting sound resonance to the cone is either a "biscuit" bridge, made of a small piece of hardwood at the vertex of the cone (Nationals), or a "spider" bridge, made of metal and mounted around the rim of the (inverted) cone (Dobros). Three-cone resonators always use a specialized metal bridge. The type of resonator guitar with a neck with a square cross-section—called "square neck" or "Hawaiian"—is usually played face up, on the lap of the seated player, and often with a metal or glass slide. The round neck resonator guitars are normally played in the same fashion as other guitars, although slides are also often used, especially in blues.

Of course, there are a few ways to narrow down the string options. For starters, since guitars come in different scales, you need a set that's the right length for your instrument. You also need to match the type of guitar: electric strings for an electric guitar, acoustic strings for acoustic. If you play an acoustic-electric, you'll usually be looking for acoustic strings since those instruments use non-magnetic pickups. For classical and Latin guitar types directly descended from ancient gut-stringed instruments, the right strings are generally going to be nylon.
Almost all guitars have frets, which are metal strips (usually nickel alloy or stainless steel) embedded along the fretboard and located at exact points that divide the scale length in accordance with a specific mathematical formula. The exceptions include fretless bass guitars and very rare fretless guitars. Pressing a string against a fret determines the strings' vibrating length and therefore its resultant pitch. The pitch of each consecutive fret is defined at a half-step interval on the chromatic scale. Standard classical guitars have 19 frets and electric guitars between 21 and 24 frets, although guitars have been made with as many as 27 frets. Frets are laid out to accomplish an equal tempered division of the octave. Each set of twelve frets represents an octave. The twelfth fret divides the scale length exactly into two halves, and the 24th fret position divides one of those halves in half again.
The hardest thing about playing chords when you get started is changing between them. To effectively change between chords, you need to be economical with your movements. Spend a bit of time thinking about where your fingers need to be for each chord, and work out the most efficient way to move from one to the other. For example, from a C major, you can flatten your index finger so it covers the first string too and move your middle and ring fingers both down a string to switch to an F. Easy changes to start with are between C major and A minor and G major and E minor.
Once you've got your categories narrowed down, then you can start getting into the nitty-gritty differences between strings. For instance, electric guitars will give you the choice between nickel (for authentic vintage sound) and stainless steel (for maximum durability). Some string manufacturers have exotic material options with their own unique characteristics, like Ernie Ball's Slinky Cobalt strings. With so many subtle differences separating guitar strings, you owe it to yourself to browse carefully and look at all the choices on the table before making a decision.
Am Strut Solo 1 is a free guitar lesson that will teach you how to play a blues solo over our original Am Strut jam track. Peter Vogl will show you how to use the Am pentatonic scale in the open position, the A natural minor scale, and some outside notes to create a solo. We’ll use hammer-ons, slides, and our right hand to create a more expressive solo. Specifically, we’ll use the thumb instead of a pick to play the strings and add a plucky and funky vibe. Peter will start by walking you through the theory choices and how to play the solo in detail. Next, we’ll practice the whole solo at a reduced speed with a metronome before advancing to playing along with the track. Sign up for a free 7 day trial and access a PDF of the tabs, a downloadable mp3 jam track, and three more solos over this progression.
When you play a guitar, bass, ukulele, mandolin or any other instrument in this big family, it's the vibration of the strings that creates your sound. That's common knowledge, of course, but have you ever stopped to really think about the implications? It's all too easy to dismiss your strings as just another part of your instrument, but the truth is they're more like its heart - and since playing the instrument means touching its strings, they also have a huge impact on the way it feels to play. With all that in mind, it's easy to see why the choice of strings is such an important one: it can make a massive difference in every aspect of your instrument, especially playability and tone. Picking out a new set of strings involves a number of choices, and those will depend on the specific instrument, so don't forget to filter the lineup by selecting a category. In most cases, that'll leave you with an easy-to-browse range of options - although if you're a guitarist or bassist, you'll still have hundreds to look at... and it might take a little more filtering to narrow things down further. Choosing your gauges will go a long way, not to mention material, which ranges from nylon for classical guitars to phosphor-bronze in acoustics and steel, nickel or even cobalt for electric guitars. Another aspect of strings to consider in your decision is coating. Traditional coated strings have a smoother feel than their uncoated cousins and usually last much longer, but they're also wider and that can make them sound different. If you like the idea of coated strings, but don't want to give up the tone you get with uncoated ones, then check out Elixir and Cleartone strings: these two manufacturers have mastered the art of ultra-thin, "barely-there" coatings that behave more like traditional strings. We've only just scratched the surface of what's available in this section, and there's a lot to see no matter what instrument you play. Different materials and gauges, coated or uncoated - it's up to you. You can buy your strings one at a time, go for a set or even stock up with multiple sets of strings at once. Still not sure where to begin? Try starting with the top-selling and best-rated strings and go from there. Finding the perfect set will probably take some experimentation, but there's no better guide than other musicians to get you on the right track.

Ask any veteran musician, and they'll tell you that the early stages of learning a musical instrument go by a lot smoother when you're having fun. For this reason, Guitar Center strives their hardest to ensure every guitar lesson they offer is fully-engaging and an absolute blast for everyone involved. Whether you're into the warm, natural sound of an acoustic guitar or have aspirations of blowing out ear drums on the biggest stages in town, GC's guitar lessons are designed so that players of all ages, skill levels and tastes learn the chords and scales they need to know (and want to know) in a comfortable environment.
Learning guitar is a lot of fun, and with the right lessons anyone can become a great guitar player. However, to be successful it's important to pick the right learning method and stay focused. We designed our Core Learning System to be a step-by-step system that keeps beginners on-track and having fun. Give it a try today by becoming a Full Access member.
The lower strap button is usually located at the bottom (bridge end) of the body. The upper strap button is usually located near or at the top (neck end) of the body: on the upper body curve, at the tip of the upper "horn" (on a double cutaway), or at the neck joint (heel). Some electrics, especially those with odd-shaped bodies, have one or both strap buttons on the back of the body. Some Steinberger electric guitars, owing to their minimalist and lightweight design, have both strap buttons at the bottom of the body. Rarely, on some acoustics, the upper strap button is located on the headstock. Some acoustic and classical guitars only have a single strap button at the bottom of the body—the other end must be tied onto the headstock, above the nut and below the machine heads.
TrueFire's In The Jam delivers an unparalleled jamming experience for the practicing musician. The next best thing to being there live, In The Jam puts YOU in the jam with top artists. Each edition includes multi-track video jams organized into separate video and audio tracks for each of the instruments. You can mute, solo or adjust the volume of any track.
The fingerboard, also called the fretboard, is a piece of wood embedded with metal frets that comprises the top of the neck. It is flat on classical guitars and slightly curved crosswise on acoustic and electric guitars. The curvature of the fretboard is measured by the fretboard radius, which is the radius of a hypothetical circle of which the fretboard's surface constitutes a segment. The smaller the fretboard radius, the more noticeably curved the fretboard is. Most modern guitars feature a 12" neck radius, while older guitars from the 1960s and 1970s usually feature a 6-8" neck radius. Pinching a string against a fret on fretboard effectively shortens the vibrating length of the string, producing a higher pitch.
The playing of conventional chords is simplified by open tunings, which are especially popular in folk, blues guitar and non-Spanish classical guitar (such as English and Russian guitar). For example, the typical twelve-bar blues uses only three chords, each of which can be played (in every open tuning) by fretting six-strings with one finger. Open tunings are used especially for steel guitar and slide guitar. Open tunings allow one-finger chords to be played with greater consonance than do other tunings, which use equal temperament, at the cost of increasing the dissonance in other chords.
Extending the tunings of violins and cellos, all-fifths tuning offers an expanded range CGDAEB,[25] which however has been impossible to implement on a conventional guitar. All-fifths tuning is used for the lowest five strings of the new standard tuning of Robert Fripp and his former students in Guitar Craft courses; new standard tuning has a high G on its last string CGDAE-G.[26][27]
Guitars have been played since the Renaissance era, after descending from the ancient Greek instrument, the kithara. Or, at least, that's how the theory goes: the only real proof for this is the similarities between the Greek word and the Spanish word, quitarra. Early guitars often had four strings, evolving into the six-string version we know today in the late 1600s. Anton Stradivari, the famous violin-maker, also had a hand in making guitars. There's now only one Stradivarius guitar left in existence.