This unique degree program combines contemporary music performance training with the rigorous study of traditional disciplines including sight-reading, music history, arranging, conducting, recording and more. The comprehensive program instructs students to demonstrate stylistic depth, creative maturity and professional competence in preparation for careers in today’s music industry.
The neck joint or heel is the point at which the neck is either bolted or glued to the body of the guitar. Almost all acoustic steel-string guitars, with the primary exception of Taylors, have glued (otherwise known as set) necks, while electric guitars are constructed using both types. Most classical guitars have a neck and headblock carved from one piece of wood, known as a "Spanish heel." Commonly used set neck joints include mortise and tenon joints (such as those used by C. F. Martin & Co.), dovetail joints (also used by C. F. Martin on the D-28 and similar models) and Spanish heel neck joints, which are named after the shoe they resemble and commonly found in classical guitars. All three types offer stability.
An open tuning allows a chord to be played by strumming the strings when "open", or while fretting no strings. The base chord consists of at least three notes and may include all the strings or a subset. The tuning is named for the base chord when played open, typically a major triad, and each major-triad can be played by barring exactly one fret.[60] Open tunings are common in blues and folk music,[59] and they are used in the playing of slide and lap-slide ("Hawaiian") guitars.[60][61] Ry Cooder uses open tunings when he plays slide guitar.[59]
Many influences are cited as antecedents to the modern guitar. Although the development of the earliest "guitars" is lost in the history of medieval Spain, two instruments are commonly cited as their most influential predecessors, the European lute and its cousin, the four-string oud; the latter was brought to Iberia by the Moors in the 8th century.[7]
Bolt-on necks, though they are historically associated with cheaper instruments, do offer greater flexibility in the guitar's set-up, and allow easier access for neck joint maintenance and repairs. Another type of neck, only available for solid body electric guitars, is the neck-through-body construction. These are designed so that everything from the machine heads down to the bridge are located on the same piece of wood. The sides (also known as wings) of the guitar are then glued to this central piece. Some luthiers prefer this method of construction as they claim it allows better sustain of each note. Some instruments may not have a neck joint at all, having the neck and sides built as one piece and the body built around it.
YellowBrickCinema composes Sleep Music, Study Music and Focus Music, Relaxing Music, Meditation Music (including Tibetan Music and Shamanic Music), Healing Music, Reiki Music, Zen Music, Spa Music and Massage Music, Instrumental Music (including Piano Music, Guitar Music and Flute Music) and Yoga Music. We also produce music videos with Classical Music from composers such as Mozart, Beethoven and Bach.
We use technologies, such as cookies, to customize content and advertising, to provide social media features and to analyze traffic to the site. We also share information about your use of our site with our trusted social media, advertising, and analytics partners. You indicate your consent to this use by clicking “I Agree” or by continuing to use this website. View details.
A guitar's frets, fretboard, tuners, headstock, and truss rod, all attached to a long wooden extension, collectively constitute its neck. The wood used to make the fretboard usually differs from the wood in the rest of the neck. The bending stress on the neck is considerable, particularly when heavier gauge strings are used (see Tuning), and the ability of the neck to resist bending (see Truss rod) is important to the guitar's ability to hold a constant pitch during tuning or when strings are fretted. The rigidity of the neck with respect to the body of the guitar is one determinant of a good instrument versus a poor-quality one.
When all is said and done, the only way to know for sure what a certain set of strings will sound like on your guitar is to take them for a spin. For that reason, it's not a bad idea to try out a few different ones that interest you to see which ones you like best - then you can stock up! However you like to approach your string shopping, the amazing selection you'll find here is sure to satisfy.

The original purpose of the resonator was to produce a very loud sound; this purpose has been largely superseded by electrical amplification, but the resonator guitar is still played because of its distinctive tone. Resonator guitars may have either one or three resonator cones. The method of transmitting sound resonance to the cone is either a "biscuit" bridge, made of a small piece of hardwood at the vertex of the cone (Nationals), or a "spider" bridge, made of metal and mounted around the rim of the (inverted) cone (Dobros). Three-cone resonators always use a specialized metal bridge. The type of resonator guitar with a neck with a square cross-section—called "square neck" or "Hawaiian"—is usually played face up, on the lap of the seated player, and often with a metal or glass slide. The round neck resonator guitars are normally played in the same fashion as other guitars, although slides are also often used, especially in blues.

As a beginner guitar player, one of the most difficult hurdles to overcome is that of transition between chords. We learn the chords to our favourite songs or a new complex chord shape, but when it comes to making music with them, our lack of muscle memory and dexterity inhibits us from stringing these chords together in a meaningful and comprehensive manner.
All three principal types of resonator guitars were invented by the Slovak-American John Dopyera (1893–1988) for the National and Dobro (Dopyera Brothers) companies. Similar to the flat top guitar in appearance, but with a body that may be made of brass, nickel-silver, or steel as well as wood, the sound of the resonator guitar is produced by one or more aluminum resonator cones mounted in the middle of the top. The physical principle of the guitar is therefore similar to the loudspeaker.
There really isn't a best age for kids to start guitar lessons, but most children under the age of 7 generally don't have the dexterity or patience needed to learn to play the guitar. With persistence and motivation some kids have learned to play guitar at some impressively young ages, but it really comes down to is the individual attitude and maturity level of the student. 

{"eVar4":"shop: accessories","eVar5":"shop: accessories: strings","pageName":"[mf] shop: accessories: strings: guitar strings","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: accessories: strings","prop1":"[mf] shop: accessories","evar51":"default: united states","prop10":"category","prop11":"guitar strings","prop5":"[mf] shop: accessories: strings: guitar strings","prop6":"[mf] shop: accessories: strings: guitar strings","prop3":"[mf] shop: accessories: strings: guitar strings","prop4":"[mf] shop: accessories: strings: guitar strings","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category2"}

The electric guitar initially met with skepticism from traditionalists, but country and blues players and jazz instrumentalists soon took to the variety of new tones and sounds that the electric guitar could produce, exploring innovative ways to alter, bend and sustain notes. The instrument's volume and tones proved particularly appealing to the enthusiasts of rock and roll in the 1950s.