Dots are usually inlaid into the upper edge of the fretboard in the same positions, small enough to be visible only to the player. These usually appear on the odd numbered frets, but also on the 12th fret (the one octave mark) instead of the 11th and 13th frets. Some older or high-end instruments have inlays made of mother of pearl, abalone, ivory, colored wood or other exotic materials and designs. Simpler inlays are often made of plastic or painted. High-end classical guitars seldom have fretboard inlays as a well-trained player is expected to know his or her way around the instrument. In addition to fretboard inlay, the headstock and soundhole surround are also frequently inlaid. The manufacturer's logo or a small design is often inlaid into the headstock. Rosette designs vary from simple concentric circles to delicate fretwork mimicking the historic rosette of lutes. Bindings that edge the finger and sound boards are sometimes inlaid. Some instruments have a filler strip running down the length and behind the neck, used for strength or to fill the cavity through which the truss rod was installed in the neck.
The intervals between the notes of a chromatic scale are listed in a table, in which only the emboldened intervals are discussed in this article's section on fundamental chords; those intervals and other seventh-intervals are discussed in the section on intermediate chords. The unison and octave intervals have perfect consonance. Octave intervals were popularized by the jazz playing of Wes Montgomery. The perfect-fifth interval is highly consonant, which means that the successive playing of the two notes from the perfect fifth sounds harmonious.
There's an abundance of guitar information out there on the web, some good, some not. I stumbled across Justin Sandercoe's site a year ago and now tell everyone about it. The lessons are conveyed so clearly, concisely and in the most congenial way. The site is laid out logically as well so you can to go straight to your area of interest... beginner, blues, rock, folk, jazz, rhythm, fingerpicking... it's all there and more. Spend ten minutes with Justin and you'll not only play better but feel better too. From novice to know-it-all, everyone will learn something from Sandercoe.
Electric guitars and bass guitars have to be used with a guitar amplifier and loudspeaker or a bass amplifier and speaker, respectively, in order to make enough sound to be heard by the performer and audience. Electric guitars and bass guitars almost always use magnetic pickups, which generate an electric signal when the musician plucks, strums or otherwise plays the instrument. The amplifier and speaker strengthen this signal using a power amplifier and a loudspeaker. Acoustic guitars that are equipped with a piezoelectric pickup or microphone can also be plugged into an instrument amplifier, acoustic guitar amp or PA system to make them louder. With electric guitar and bass, the amplifier and speaker are not just used to make the instrument louder; by adjusting the equalizer controls, the preamplifier, and any onboard effects units (reverb, distortion/overdrive, etc.) the player can also modify the tone (aka timbre or "colour") and sound of the instrument. Acoustic guitar players can also use the amp to change the sound of their instrument, but in general, acoustic guitar amps are used to make the natural acoustic sound of the instrument louder without changing its sound that much.
The standard guitar has six strings, but four-, seven-, eight-, nine-, ten-, eleven-, twelve-, thirteen- and eighteen-string guitars are also available. Classical and flamenco guitars historically used gut strings, but these have been superseded by polymer materials, such as nylon and fluorocarbon. Modern guitar strings are constructed from metal, polymers, or animal or plant product materials. Instruments utilizing "steel" strings may have strings made from alloys incorporating steel, nickel or phosphor bronze. Bass strings for both instruments are wound rather than monofilament.
There are two basic types of electric guitars: solidbody and hollowbody. Today, the electric guitar still features in all types of music Ð rock, blues, jazz and big bands Ð and is played by men and women, young and old, throughout the world. Some well-known electric guitarists include Muddy Waters, Jimi Hendrix, Eric Clapton, Jimmy Page, Eddie Van Halen, Steve Vai, Joe Satriani, Pat Metheny, Wes Montgomery, Chrissie Hynde and Liz Phair.
The headstock is located at the end of the guitar neck farthest from the body. It is fitted with machine heads that adjust the tension of the strings, which in turn affects the pitch. The traditional tuner layout is "3+3", in which each side of the headstock has three tuners (such as on Gibson Les Pauls). In this layout, the headstocks are commonly symmetrical. Many guitars feature other layouts, including six-in-line tuners (featured on Fender Stratocasters) or even "4+2" (e.g. Ernie Ball Music Man). Some guitars (such as Steinbergers) do not have headstocks at all, in which case the tuning machines are located elsewhere, either on the body or the bridge.
The fingerboard, also called the fretboard, is a piece of wood embedded with metal frets that comprises the top of the neck. It is flat on classical guitars and slightly curved crosswise on acoustic and electric guitars. The curvature of the fretboard is measured by the fretboard radius, which is the radius of a hypothetical circle of which the fretboard's surface constitutes a segment. The smaller the fretboard radius, the more noticeably curved the fretboard is. Most modern guitars feature a 12" neck radius, while older guitars from the 1960s and 1970s usually feature a 6-8" neck radius. Pinching a string against a fret on fretboard effectively shortens the vibrating length of the string, producing a higher pitch.
All courses are available as instant downloads, on disc, or as streaming video on our website and mobile apps for iOS and Android. Study anywhere, anytime in the format of your choice. Interactive features and functions include standard notation, Power Tab, Guitar Pro, jam tracks, playback controls, video looping, slow-mo, tuner, metronome and other learning tools.
Justin Sandercoe has thought long and hard about how to teach people to play the guitar, and how to do this over the internet. He has come up with a well-designed series of courses that will take you from nowhere to proficiency. I tried to learn how to play years ago, using books, and got nowhere. I've been using Justin's site for just over a year and I feel I've made real progress. What's more, Justin offers his lessons for free - a boon for any young player who has the urge to play, but whose pockets are empty. I've seen and used other sites for learners: none of them offer as clearly marked a road as Justin does.
Open tuning refers to a guitar tuned so that strumming the open strings produces a chord, typically a major chord. The base chord consists of at least 3 notes and may include all the strings or a subset. The tuning is named for the open chord, Open D, open G, and open A are popular tunings. All similar chords in the chromatic scale can then be played by barring a single fret. Open tunings are common in blues and folk music, and they are used in the playing of slide and bottleneck guitars. Many musicians use open tunings when playing slide guitar.
This is a thick little book with nice big chord diagrams and shows chords in various positions. I like that it is spiral bound. The only thing missing is tabs for the letter sections so that you an easily flip to the letter note/chord you're searching for rather than having to turn a lot of pages to get to what you want. I plan to put in my own divider tabs.
UPDATE: SEPTEMBER 3rd, 2010 -- Good evening, and hi everybody! I get requests to add tabs once in a while, and for years one of the most common requests has been 'Psychic Hearts', and more recently 'Trees Outside the Academy'. I resisted for years, but boredom and the need to please has a funny way of making things happen, so I'm proud to bring you tabs for the entirety of "Psychic Hearts" and its related tracks, as well as the majority of "Trees Outside the Academy". I was originally planning on providing bass tabs as well as the Mascis solos, but I decided I wasn't that desperate for accolade. With all this attention on Thurston, I felt bad for Lee, so I've updated my outdated tab for his excellent solo acoustic piece "Here" (located under "Other Tabs") with the proper tuning, which also happens to be the tuning for the equally excellent "Lee #2", so I've updated that one too!
The truss rod is a thin, strong metal rod that runs along the inside of the neck. It is used to correct changes to the neck's curvature caused by aging of the neck timbers, changes in humidity, or to compensate for changes in the tension of strings. The tension of the rod and neck assembly is adjusted by a hex nut or an allen-key bolt on the rod, usually located either at the headstock, sometimes under a cover, or just inside the body of the guitar underneath the fretboard and accessible through the sound hole. Some truss rods can only be accessed by removing the neck. The truss rod counteracts the immense amount of tension the strings place on the neck, bringing the neck back to a straighter position. Turning the truss rod clockwise tightens it, counteracting the tension of the strings and straightening the neck or creating a backward bow. Turning the truss rod counter-clockwise loosens it, allowing string tension to act on the neck and creating a forward bow.
If you're a fan of the Grateful Dead, check out the D'Angelico Premier Series DC Grateful Dead Semi-Hollow Electric Guitar. In the acoustic department, the Alvarez Artist Series AD60 dreadnought acoustic guitar comes highly rated, thanks to its hand-selected spruce top, mahogany back and sides, and powerful tone. Singer-songwriters and fans of acoustic-driven music must check out the latest Ed Sheeran Martin guitar, the comfortable, easy-to-play Divide Signature Edition Little Martin acoustic-electric.
Bolt-on necks, though they are historically associated with cheaper instruments, do offer greater flexibility in the guitar's set-up, and allow easier access for neck joint maintenance and repairs. Another type of neck, only available for solid body electric guitars, is the neck-through-body construction. These are designed so that everything from the machine heads down to the bridge are located on the same piece of wood. The sides (also known as wings) of the guitar are then glued to this central piece. Some luthiers prefer this method of construction as they claim it allows better sustain of each note. Some instruments may not have a neck joint at all, having the neck and sides built as one piece and the body built around it.
The sound of an acoustic guitar is arguably the most well known in all of modern popular music. Without electronic components, the guitar relies solely on the interaction between the strings and the sound box to produce every note. Because of this, the strings of your acoustic guitar can significantly influence its sound. To get the most out of your guitar, keep an eye on the condition of the strings. You don't need to wait until your strings break to replace them. When they get old enough that their tone starts to change, it's time to re-string. Depending on the guitar, you may choose either nylon or metal strings. Nylon strings are the modern substitute for gut strings, so they're usually found on older styles of guitar such as baroque or flamenco. If you play the classical guitar, take care to fit it with the correct strings: since classical guitars are sized and tensioned differently from other varieties of acoustic guitar, they can be damaged by standard strings. Similarly, classical guitar strings won't work with other guitars. For metal-stringed guitars, there are several options available, each with its own acoustic character. The three most common types of metal strings are bronze, phosphor-bronze and silk-and-steel. The staple string for many guitarists, bronze produces a bright, quickly-fading tone that's lively and well-suited to any style of music. Phosphor-bronze is similar, but with added warmth and longer sustain. For a completely different sound, consider silk-and-steel. These strings create a tone that's gentle and mellow. Lower in tension and available in lighter gauges, silk-and-steel strings are easier to play and are great for vintage guitars that need special strings. It's also important to keep in mind the gauge of the strings you're choosing. Higher gauges are thicker, producing increased volume and extended sustain with an overall warmer tone. The trade-off of the rich overtones of heavy-gauge strings is that they are more challenging to play, requiring more force to fret, pick and strum. If you are an experienced guitarist, you likely have a preferred gauge already. If you're a beginner, it's a good idea to start with a lighter gauge to make the learning curve more forgiving. In the end, the right combination of material and gauge is a matter of personal preference. You may need to try several different acoustic guitar strings before you find the perfect ones for you, but the results will certainly be worth it.
You need to place one finger on whatever fret you want to bar and hold it there over all of the strings on that fret. The rest of your fingers will act as the next finger down the line (second finger barring, so third finger will be your main finger, and so on). You can also buy a capo, so that you don't have to deal with the pain of the guitar's strings going against your fingers. The capo bars the frets for you. This also works with a ukulele.
This unique degree program combines contemporary music performance training with the rigorous study of traditional disciplines including sight-reading, music history, arranging, conducting, recording and more. The comprehensive program instructs students to demonstrate stylistic depth, creative maturity and professional competence in preparation for careers in today’s music industry.