Electric guitars and bass guitars have to be used with a guitar amplifier and loudspeaker or a bass amplifier and speaker, respectively, in order to make enough sound to be heard by the performer and audience. Electric guitars and bass guitars almost always use magnetic pickups, which generate an electric signal when the musician plucks, strums or otherwise plays the instrument. The amplifier and speaker strengthen this signal using a power amplifier and a loudspeaker. Acoustic guitars that are equipped with a piezoelectric pickup or microphone can also be plugged into an instrument amplifier, acoustic guitar amp or PA system to make them louder. With electric guitar and bass, the amplifier and speaker are not just used to make the instrument louder; by adjusting the equalizer controls, the preamplifier, and any onboard effects units (reverb, distortion/overdrive, etc.) the player can also modify the tone (aka timbre or "colour") and sound of the instrument. Acoustic guitar players can also use the amp to change the sound of their instrument, but in general, acoustic guitar amps are used to make the natural acoustic sound of the instrument louder without changing its sound that much.

The shape of the neck (from a cross-sectional perspective) can also vary, from a gentle "C" curve to a more pronounced "V" curve. There are many different types of neck profiles available, giving the guitarist many options. Some aspects to consider in a guitar neck may be the overall width of the fretboard, scale (distance between the frets), the neck wood, the type of neck construction (for example, the neck may be glued in or bolted on), and the shape (profile) of the back of the neck. Other types of material used to make guitar necks are graphite (Steinberger guitars), aluminum (Kramer Guitars, Travis Bean and Veleno guitars), or carbon fiber (Modulus Guitars and ThreeGuitars). Double neck electric guitars have two necks, allowing the musician to quickly switch between guitar sounds.
At MI, you learn from a proven curriculum taught by the best guitar instructors in the world, augmented by visiting artists’ seminars, concerts, and lessons from some of the greatest players in contemporary music. At our guitar music college, you get to network with other players, find your creative voice, and get the training you need to become the player you have always dreamed of being.
For the longest time I have "messed around" with my guitar. I bought a book on Jazz guitar chords many years ago and found that those fingerings were way above my skill level. I decided to get a basic chord book to reinitiate myself. This is that book. Going through these pages has re-ignited my lust to learn more about playing my guitar. One chord at a time. Simple. Skip to another key just as simple. Actually, I haven't realized how many chords I really know how to play. I just need to learn the name of those chords. This book will help with that too. Give it a try.
Most electric guitar bodies are made of wood and include a plastic pick guard. Boards wide enough to use as a solid body are very expensive due to the worldwide depletion of hardwood stock since the 1970s, so the wood is rarely one solid piece. Most bodies are made from two pieces of wood with some of them including a seam running down the center line of the body. The most common woods used for electric guitar body construction include maple, basswood, ash, poplar, alder, and mahogany. Many bodies consist of good-sounding, but inexpensive woods, like ash, with a "top", or thin layer of another, more attractive wood (such as maple with a natural "flame" pattern) glued to the top of the basic wood. Guitars constructed like this are often called "flame tops". The body is usually carved or routed to accept the other elements, such as the bridge, pickup, neck, and other electronic components. Most electrics have a polyurethane or nitrocellulose lacquer finish. Other alternative materials to wood are used in guitar body construction. Some of these include carbon composites, plastic material, such as polycarbonate, and aluminum alloys.
When you play a guitar, bass, ukulele, mandolin or any other instrument in this big family, it's the vibration of the strings that creates your sound. That's common knowledge, of course, but have you ever stopped to really think about the implications? It's all too easy to dismiss your strings as just another part of your instrument, but the truth is they're more like its heart - and since playing the instrument means touching its strings, they also have a huge impact on the way it feels to play. With all that in mind, it's easy to see why the choice of strings is such an important one: it can make a massive difference in every aspect of your instrument, especially playability and tone. Picking out a new set of strings involves a number of choices, and those will depend on the specific instrument, so don't forget to filter the lineup by selecting a category. In most cases, that'll leave you with an easy-to-browse range of options - although if you're a guitarist or bassist, you'll still have hundreds to look at... and it might take a little more filtering to narrow things down further. Choosing your gauges will go a long way, not to mention material, which ranges from nylon for classical guitars to phosphor-bronze in acoustics and steel, nickel or even cobalt for electric guitars. Another aspect of strings to consider in your decision is coating. Traditional coated strings have a smoother feel than their uncoated cousins and usually last much longer, but they're also wider and that can make them sound different. If you like the idea of coated strings, but don't want to give up the tone you get with uncoated ones, then check out Elixir and Cleartone strings: these two manufacturers have mastered the art of ultra-thin, "barely-there" coatings that behave more like traditional strings. We've only just scratched the surface of what's available in this section, and there's a lot to see no matter what instrument you play. Different materials and gauges, coated or uncoated - it's up to you. You can buy your strings one at a time, go for a set or even stock up with multiple sets of strings at once. Still not sure where to begin? Try starting with the top-selling and best-rated strings and go from there. Finding the perfect set will probably take some experimentation, but there's no better guide than other musicians to get you on the right track.
Inlays are visual elements set into the exterior surface of a guitar, both for decoration and artistic purposes and, in the case of the markings on the 3rd, 5th, 7th and 12th fret (and in higher octaves), to provide guidance to the performer about the location of frets on the instrument. The typical locations for inlay are on the fretboard, headstock, and on acoustic guitars around the soundhole, known as the rosette. Inlays range from simple plastic dots on the fretboard to intricate works of art covering the entire exterior surface of a guitar (front and back). Some guitar players have used LEDs in the fretboard to produce unique lighting effects onstage. Fretboard inlays are most commonly shaped like dots, diamond shapes, parallelograms, or large blocks in between the frets.
Only two or three frets are needed for the guitar chords—major, minor, and dominant sevenths—which are emphasized in introductions to guitar-playing and to the fundamentals of music.[87][88] Each major and minor chord can be played on exactly two successive frets on exactly three successive strings, and therefore each needs only two fingers. Other chords—seconds, fourths, sevenths, and ninths—are played on only three successive frets.[89]
Paul Gilbert has made Guitar World's "50 Fastest Guitarists of All Time", and his guitar shredding is legendary. Paul picked up his first guitar when he was 5 years old. By the time he was 15, he was featured in Guitar Player magazine. After graduating from the Guitar Institute of Technology (GIT) in Los Angeles, Paul immediately joined the faculty as a guitar teacher. While teaching, he formed the band Racer X and Grammy-nominated group Mr. Big. Paul breaks down his iconic playing techniques and practice drills. He's known for his enthusiastic and approachable guitar lessons, which are founded on decades of experience.
BUT, I use it a very differently. I use a week's lesson as a week's lesson! I don't play one a day, I play the whole week's worth each day! And, I stay on the week's lessons until I have them down. I very often back to earlier weeks, and go over them to see how much better I play them, see if they are really in my fingers..and they are perfect warm ups. I go on to new week's lessons, only if and when I feel ready.

Are you stuck in a musical rut? New tunings and tricks can help you keep learning guitar in fresh, fun ways. Try one of these great tips from guitar teacher Samuel B. to breathe new life into your guitar playing... One of the first things I tell any new student is that I don't specialize in a formal discipline. If jazz or classical training is your objective, then I'm not your guy. Instead, I specialize primarily in American roots music (that which we tend to casually lump together as "folk"
As you start practicing, your fingers may be sore for a while, but that will pass with four to six weeks. One thing I want to warn you about is that new guitar players can get frustrated when they can’t play clean chords because they try to switch between chords too soon. Often, they try to switch chords before they’ve really learned and memorized each chord shape. For now, don’t worry about switching chords and just work on each shape, getting them down, and going right to them.
As you start practicing, your fingers may be sore for a while, but that will pass with four to six weeks. One thing I want to warn you about is that new guitar players can get frustrated when they can’t play clean chords because they try to switch between chords too soon. Often, they try to switch chords before they’ve really learned and memorized each chord shape. For now, don’t worry about switching chords and just work on each shape, getting them down, and going right to them.

We believe that music is a social activity so we present students with numerous opportunities to interact with each other. Each year we hold multiple recitals which offer a low-pressure opportunity to perform in front of an audience with other like-minded music students.  In addition to recitals, students frequently go out into the community to perform outreach concerts at local hospitals, schools, and nursing homes. Students also have the option to join group classes at our Santa Clara location. This offers students a chance to perform for each other more frequently, as well as join on our many performance ensembles. 
The truss rod is a thin, strong metal rod that runs along the inside of the neck. It is used to correct changes to the neck's curvature caused by aging of the neck timbers, changes in humidity, or to compensate for changes in the tension of strings. The tension of the rod and neck assembly is adjusted by a hex nut or an allen-key bolt on the rod, usually located either at the headstock, sometimes under a cover, or just inside the body of the guitar underneath the fretboard and accessible through the sound hole. Some truss rods can only be accessed by removing the neck. The truss rod counteracts the immense amount of tension the strings place on the neck, bringing the neck back to a straighter position. Turning the truss rod clockwise tightens it, counteracting the tension of the strings and straightening the neck or creating a backward bow. Turning the truss rod counter-clockwise loosens it, allowing string tension to act on the neck and creating a forward bow.

There's an abundance of guitar information out there on the web, some good, some not. I stumbled across Justin Sandercoe's site a year ago and now tell everyone about it. The lessons are conveyed so clearly, concisely and in the most congenial way. The site is laid out logically as well so you can to go straight to your area of interest... beginner, blues, rock, folk, jazz, rhythm, fingerpicking... it's all there and more. Spend ten minutes with Justin and you'll not only play better but feel better too. From novice to know-it-all, everyone will learn something from Sandercoe.
Bolt-on necks, though they are historically associated with cheaper instruments, do offer greater flexibility in the guitar's set-up, and allow easier access for neck joint maintenance and repairs. Another type of neck, only available for solid body electric guitars, is the neck-through-body construction. These are designed so that everything from the machine heads down to the bridge are located on the same piece of wood. The sides (also known as wings) of the guitar are then glued to this central piece. Some luthiers prefer this method of construction as they claim it allows better sustain of each note. Some instruments may not have a neck joint at all, having the neck and sides built as one piece and the body built around it.
A slide, (neck of a bottle, knife blade or round metal or glass bar or cylinder) is used in blues and rock to create a glissando or "Hawaiian" effect. The slide is used to fret notes on the neck, instead of using the fretting hand's fingers. The characteristic use of the slide is to move up to the intended pitch by, as the name implies, sliding up the neck to the desired note. The necks of bottles were often used in blues and country music as improvised slides. Modern slides are constructed of glass, plastic, ceramic, chrome, brass or steel bars or cylinders, depending on the weight and tone desired (and the amount of money a guitarist can spend). An instrument that is played exclusively in this manner (using a metal bar) is called a steel guitar or pedal steel. Slide playing to this day is very popular in blues music and country music. Some slide players use a so-called Dobro guitar. Some performers who have become famous for playing slide are Robert Johnson, Elmore James, Ry Cooder, George Harrison, Bonnie Raitt, Derek Trucks, Warren Haynes, Duane Allman, Muddy Waters, Rory Gallagher, and George Thorogood.
With just a little more music theory, you can learn to write simple songs with the chords you've just learned. The song would be in the key of C major (C, D, E, F, G, A and B). You can use the major chords for the I, IV and V notes and the minors for the II, III and VI notes. That means you can play a chord progression which uses all of the chords you've learnt, if you want to.
The guitar is a type of chordophone, traditionally constructed from wood and strung with either gut, nylon or steel strings and distinguished from other chordophones by its construction and tuning. The modern guitar was preceded by the gittern, the vihuela, the four-course Renaissance guitar, and the five-course baroque guitar, all of which contributed to the development of the modern six-string instrument.

All three principal types of resonator guitars were invented by the Slovak-American John Dopyera (1893–1988) for the National and Dobro (Dopyera Brothers) companies. Similar to the flat top guitar in appearance, but with a body that may be made of brass, nickel-silver, or steel as well as wood, the sound of the resonator guitar is produced by one or more aluminum resonator cones mounted in the middle of the top. The physical principle of the guitar is therefore similar to the loudspeaker.

The twelve-string guitar usually has steel strings, and it is widely used in folk music, blues, and rock and roll. Rather than having only six strings, the 12-string guitar has six courses made up of two strings each, like a mandolin or lute. The highest two courses are tuned in unison, while the others are tuned in octaves. The 12-string guitar is also made in electric forms. The chime-like sound of the 12-string electric guitar was the basis of jangle pop.
Justin, first off I just wanted to say thanks for all the advice and instruction. You make playing guitar easy and understandable and fun. You explain very well the hows and whys when presenting a new song to learn and walk it through so that anyone can learn. I have played guitar for 20 years now and have learned more from you in the last five years than the previous 15 by myself. You have also been a tremendous help to both my son and my daughter in learning to play as well by making playing fun and interesting. I have a couple of pictures of me and my children all doing what we love. Many Thanks to you Justin
The sound of an acoustic guitar is arguably the most well known in all of modern popular music. Without electronic components, the guitar relies solely on the interaction between the strings and the sound box to produce every note. Because of this, the strings of your acoustic guitar can significantly influence its sound. To get the most out of your guitar, keep an eye on the condition of the strings. You don't need to wait until your strings break to replace them. When they get old enough that their tone starts to change, it's time to re-string. Depending on the guitar, you may choose either nylon or metal strings. Nylon strings are the modern substitute for gut strings, so they're usually found on older styles of guitar such as baroque or flamenco. If you play the classical guitar, take care to fit it with the correct strings: since classical guitars are sized and tensioned differently from other varieties of acoustic guitar, they can be damaged by standard strings. Similarly, classical guitar strings won't work with other guitars. For metal-stringed guitars, there are several options available, each with its own acoustic character. The three most common types of metal strings are bronze, phosphor-bronze and silk-and-steel. The staple string for many guitarists, bronze produces a bright, quickly-fading tone that's lively and well-suited to any style of music. Phosphor-bronze is similar, but with added warmth and longer sustain. For a completely different sound, consider silk-and-steel. These strings create a tone that's gentle and mellow. Lower in tension and available in lighter gauges, silk-and-steel strings are easier to play and are great for vintage guitars that need special strings. It's also important to keep in mind the gauge of the strings you're choosing. Higher gauges are thicker, producing increased volume and extended sustain with an overall warmer tone. The trade-off of the rich overtones of heavy-gauge strings is that they are more challenging to play, requiring more force to fret, pick and strum. If you are an experienced guitarist, you likely have a preferred gauge already. If you're a beginner, it's a good idea to start with a lighter gauge to make the learning curve more forgiving. In the end, the right combination of material and gauge is a matter of personal preference. You may need to try several different acoustic guitar strings before you find the perfect ones for you, but the results will certainly be worth it.

Archtop guitars are steel-string instruments in which the top (and often the back) of the instrument are carved, from a solid billet, into a curved, rather than a flat, shape. This violin-like construction is usually credited to the American Orville Gibson. Lloyd Loar of the Gibson Mandolin-Guitar Mfg. Co introduced the violin-inspired "F"-shaped hole design now usually associated with archtop guitars, after designing a style of mandolin of the same type. The typical archtop guitar has a large, deep, hollow body whose form is much like that of a mandolin or a violin-family instrument. Nowadays, most archtops are equipped with magnetic pickups, and they are therefore both acoustic and electric. F-hole archtop guitars were immediately adopted, upon their release, by both jazz and country musicians, and have remained particularly popular in jazz music, usually with flatwound strings.

Through School of Rock's private guitar lessons and group rehearsals, children learn to play the guitar and eventually perform the songs they love in a fun, supportive and comfortable atmosphere. Based on the student's age and skill level, guitar lessons for kids are part of every School of Rock music program including Rookies, Rock 101, Performance, House Band, and AllStars.

The main purpose of the bridge on an acoustic guitar is to transfer the vibration from the strings to the soundboard, which vibrates the air inside of the guitar, thereby amplifying the sound produced by the strings. On all electric, acoustic and original guitars, the bridge holds the strings in place on the body. There are many varied bridge designs. There may be some mechanism for raising or lowering the bridge saddles to adjust the distance between the strings and the fretboard (action), or fine-tuning the intonation of the instrument. Some are spring-loaded and feature a "whammy bar", a removable arm that lets the player modulate the pitch by changing the tension on the strings. The whammy bar is sometimes also called a "tremolo bar". (The effect of rapidly changing pitch is properly called "vibrato". See Tremolo for further discussion of this term.) Some bridges also allow for alternate tunings at the touch of a button.
The types and models of pickups used can greatly affect the tone of the guitar. Typically, humbuckers, which are two magnet-coil assemblies attached to each other, are traditionally associated with a heavier sound. Single-coil pickups, one magnet wrapped in copper wire, are used by guitarists seeking a brighter, twangier sound with greater dynamic range.
Am Strut Solo 1 is a free guitar lesson that will teach you how to play a blues solo over our original Am Strut jam track. Peter Vogl will show you how to use the Am pentatonic scale in the open position, the A natural minor scale, and some outside notes to create a solo. We’ll use hammer-ons, slides, and our right hand to create a more expressive solo. Specifically, we’ll use the thumb instead of a pick to play the strings and add a plucky and funky vibe. Peter will start by walking you through the theory choices and how to play the solo in detail. Next, we’ll practice the whole solo at a reduced speed with a metronome before advancing to playing along with the track. Sign up for a free 7 day trial and access a PDF of the tabs, a downloadable mp3 jam track, and three more solos over this progression.
Solo, lead, and rhythm guitarists everywhere can now access the best selection of instantly downloadable digital sheet music and guitar tab on the internet. Put down the pick for just a moment and put your fingers to work browsing through Musicnotes.com's vast archives of guitar tabs ready to be enjoyed by musicians of all ages. Our collection features a weekly updated catalogue of some of guitars greatest compilations.