What's the best way to learn guitar? No matter which method you choose, or what style of music you want to play, these three rules from guitar teacher Sean L. are sure to put you on the road to success... Learning guitar can be a daunting task when first approached. For many it is seen as only for the musically adept, but in reality anyone can learn guitar. By following these three simple rules, anyone can become a great guitarist. 1. Set Goals There is no one path to take for learning
A capo (short for capotasto) is used to change the pitch of open strings.[28] Capos are clipped onto the fretboard with the aid of spring tension, or in some models, elastic tension. To raise the guitar's pitch by one semitone, the player would clip the capo onto the fretboard just below the first fret. Its use allows players to play in different keys without having to change the chord formations they use. For example, if a folk guitar player wanted to play a song in the key of B Major, they could put a capo on the second fret of the instrument, and then play the song as if it were in the key of A Major, but with the capo the instrument would make the sounds of B Major. This is because with the capo barring the entire second fret, open chords would all sound two semitones (aka one tone) higher in pitch. For example, if a guitarist played an open A Major chord (a very common open chord), it would sound like a B Major chord. All of the other open chords would be similarly modified in pitch. Because of the ease with which they allow guitar players to change keys, they are sometimes referred to with pejorative names, such as "cheaters" or the "hillbilly crutch". Despite this negative viewpoint, another benefit of the capo is that it enables guitarists to obtain the ringing, resonant sound of the common keys (C, G, A, etc.) in "harder" and less-commonly used keys. Classical performers are known to use them to enable modern instruments to match the pitch of historical instruments such as the Renaissance music lute.
The two most common types of acoustic guitar are the steel-string guitar and the classical guitar. The classical guitar, also known as the Spanish guitar, usually uses nylon strings. Steel-string guitars originated in the United States and are also referred to as western guitar and folk guitar. Steel-string guitars sound louder and brighter than classical guitars, which have a warmer, mellower sound. Steel-string models usually have larger bodies and narrower necks, and they often have a pickguard to protect the body against scratches by picks and fingernails. Most acoustic guitars have six strings, but there are also 12-string versions. When an acoustic guitar is hooked up to an amplifier, it is referred to as acoustic/electric. Some acoustic/electric guitars incorporate a cutaway design, which makes it easier for electric guitar players to cross over to acoustic.
School of Rock's highly-trained guitar instructors are experts when it comes to inspiring teens to learn to play the guitar like a pro. Our proven formula for learning to play the guitar effectively and quickly starts with private guitar lessons plus group rehearsals in a safe and friendly environment. All teens are enrolled in or audition for one of the following programs: Rock 101, Performance, House Band, and AllStars.
Try one that starts with C, moves to F, then G and then back to C. This is the most basic progression, and uses the major chords you know. If you start with an A minor before going to C you can make a more interesting progression which incorporates both major and minor chords. Generally speaking, you want to focus on the chord with the same name as the key (the root), which in this case is C. Think of the other chords as either springing from it or leading back to it. Play around with the chords and see what you can come up with!
I have heard how giving you are in so many respects of music schooling and I must say that I am impressed. You remind me of the pure idealism that we had in starting Apple. If I were young, with time, I'd likely offer to join and help you in your endeavours. Keep making people happy, not just in their own learning, but in the example you set for them. 

Electric guitars, introduced in the 1930s, use an amplifier and a loudspeaker that both makes the sound of the instrument loud enough for the performers and audience to hear, and, given that it produces an electric signal when played, that can electronically manipulate and shape the tone using an equalizer (e.g., bass and treble tone controls) and a huge variety of electronic effects units, the most commonly used ones being distortion (or "overdrive") and reverb. Early amplified guitars employed a hollow body, but a solid wood body was eventually found more suitable during the 1960s and 1970s, as it was less prone to unwanted acoustic feedback "howls". As with acoustic guitars, there are a number of types of electric guitars, including hollowbody guitars, archtop guitars (used in jazz guitar, blues and rockabilly) and solid-body guitars, which are widely used in rock music.

Most electric guitar bodies are made of wood and include a plastic pick guard. Boards wide enough to use as a solid body are very expensive due to the worldwide depletion of hardwood stock since the 1970s, so the wood is rarely one solid piece. Most bodies are made from two pieces of wood with some of them including a seam running down the center line of the body. The most common woods used for electric guitar body construction include maple, basswood, ash, poplar, alder, and mahogany. Many bodies consist of good-sounding, but inexpensive woods, like ash, with a "top", or thin layer of another, more attractive wood (such as maple with a natural "flame" pattern) glued to the top of the basic wood. Guitars constructed like this are often called "flame tops". The body is usually carved or routed to accept the other elements, such as the bridge, pickup, neck, and other electronic components. Most electrics have a polyurethane or nitrocellulose lacquer finish. Other alternative materials to wood are used in guitar body construction. Some of these include carbon composites, plastic material, such as polycarbonate, and aluminum alloys.
Adjusting the truss rod affects the intonation of a guitar as well as the height of the strings from the fingerboard, called the action. Some truss rod systems, called double action truss systems, tighten both ways, pushing the neck both forward and backward (standard truss rods can only release to a point beyond which the neck is no longer compressed and pulled backward). The artist and luthier Irving Sloane pointed out, in his book Steel-String Guitar Construction, that truss rods are intended primarily to remedy concave bowing of the neck, but cannot correct a neck with "back bow" or one that has become twisted.[page needed] Classical guitars do not require truss rods, as their nylon strings exert a lower tensile force with lesser potential to cause structural problems. However, their necks are often reinforced with a strip of harder wood, such as an ebony strip that runs down the back of a cedar neck. There is no tension adjustment on this form of reinforcement.
Peterson, Jonathon (2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72 (Winter): 36–43. ISSN 1041-7176. Archived from the original on 21 October 2011. Retrieved 9 October 2012.
Learn a G major. Your ring finger goes on the top string, 3rd fret. The middle finger is for the 5th string, 2nd fret, and you pinky goes all the way to the bottom, on the 3rd fret of the 1st string. Strum all of the strings together to play the chord. If you want, add in the 3rd fret, 2nd string -- this not is not necessary, but makes a richer sounding chord.
Phosphor bronze strings have a warmer sound with a smooth (if somewhat understated) high end response. This makes them a great fit for genres that benefit from a mellower tone, like a lot of folk or finger-style work. These strings pair well with smaller bodied guitars, though many musicians who play more relaxed genres prefer these strings on larger bodied instruments as well.
In 1977, the Guitar Institute of Technology (GIT) revolutionized contemporary music education with the first full-time program to offer hands-on professional training for the electric guitarist. Over three decades later, MI remains the leader in guitar education, besting other colleges for guitar players, with a unique system that combines technical, creative and professional development in a performance-based program.