A guitar strap is a strip of material with an attachment mechanism on each end, made to hold a guitar via the shoulders at an adjustable length. Guitars have varying accommodations for attaching a strap. The most common are strap buttons, also called strap pins, which are flanged steel posts anchored to the guitar with screws. Two strap buttons come pre-attached to virtually all electric guitars, and many steel-string acoustic guitars. Strap buttons are sometimes replaced with "strap locks", which connect the guitar to the strap more securely.


Learning guitar is a lot easier when you have a step-by-step system to follow. Guitar Tricks lessons are interconnected and organized to get slightly harder as you progress. You watch a video lesson, play along, and then click a “Next” button to go to the next lesson. Lessons have multiple camera angles, guitar tabs, jam tracks and everything else you need to learn.
F major. This is fairly similar to the C, but a little more difficult to play. Press the fourth string down at the third fret with your ring finger, the third string down at the second fret with your middle finger, and the first and second strings down at the first fret with your index. You just flatten your index finger down across the two strings; lower your thumb if you struggle. You don't play the fifth or sixth strings in this chord.

Solo, lead, and rhythm guitarists everywhere can now access the best selection of instantly downloadable digital sheet music and guitar tab on the internet. Put down the pick for just a moment and put your fingers to work browsing through Musicnotes.com's vast archives of guitar tabs ready to be enjoyed by musicians of all ages. Our collection features a weekly updated catalogue of some of guitars greatest compilations.
The pickguard, also known as the scratchplate, is usually a piece of laminated plastic or other material that protects the finish of the top of the guitar from damage due to the use of a plectrum ("pick") or fingernails. Electric guitars sometimes mount pickups and electronics on the pickguard. It is a common feature on steel-string acoustic guitars. Some performance styles that use the guitar as a percussion instrument (tapping the top or sides between notes, etc.), such as flamenco, require that a scratchplate or pickguard be fitted to nylon-string instruments.
Solo, lead, and rhythm guitarists everywhere can now access the best selection of instantly downloadable digital sheet music and guitar tab on the internet. Put down the pick for just a moment and put your fingers to work browsing through Musicnotes.com's vast archives of guitar tabs ready to be enjoyed by musicians of all ages. Our collection features a weekly updated catalogue of some of guitars greatest compilations.
Pickups are transducers attached to a guitar that detect (or "pick up") string vibrations and convert the mechanical energy of the string into electrical energy. The resultant electrical signal can then be electronically amplified. The most common type of pickup is electromagnetic in design. These contain magnets that are within a coil, or coils, of copper wire. Such pickups are usually placed directly underneath the guitar strings. Electromagnetic pickups work on the same principles and in a similar manner to an electric generator. The vibration of the strings creates a small electric current in the coils surrounding the magnets. This signal current is carried to a guitar amplifier that drives a loudspeaker.

With that in mind, the inverse to this rule isn’t always true. During the Folk Boom of the 1950s and 60s, there were actually quite a few musicians who put nylon strings on steel string acoustics. This gave the guitar a very warm and relaxed tone, though should you choose to do this be aware that you’re going to get a lot less volume and a reduced response across the entire frequency range.
Unlike many string instruments which use a bow to create a sound, guitars are played by plucking or strumming the strings on the instrument, which vibrate to create a sound. Chords are played when the guitarist holds their fingers down on more than one individual string to change its length, which in turn changes the frequency of the vibration created - in other words, it creates a different note. Performers often use guitar tabs, rather than sheet music, when learning music: this acts as a kind of 'map' to teach guitarists where to put their fingers on the strings.
×