Steinway & Sons is pleased to recognize Susan Swenson 2016 Top Music Teacher as voted by Steinway Piano Gallery of Nashville.  She offers voice, piano, guitar, and ukulele private instruction in her Brentwood AAM Triple Arts studio where individuals of all ages and levels learn to play piano, guitar, and sing plus read and write music.  Susan is a member of national, state, and local music teacher associations. Her lif...
Bolt-on necks, though they are historically associated with cheaper instruments, do offer greater flexibility in the guitar's set-up, and allow easier access for neck joint maintenance and repairs. Another type of neck, only available for solid body electric guitars, is the neck-through-body construction. These are designed so that everything from the machine heads down to the bridge are located on the same piece of wood. The sides (also known as wings) of the guitar are then glued to this central piece. Some luthiers prefer this method of construction as they claim it allows better sustain of each note. Some instruments may not have a neck joint at all, having the neck and sides built as one piece and the body built around it.
The ratio of the spacing of two consecutive frets is {\displaystyle {\sqrt[{12}]{2}}} (twelfth root of two). In practice, luthiers determine fret positions using the constant 17.817—an approximation to 1/(1-1/ {\displaystyle {\sqrt[{12}]{2}}} ). If the nth fret is a distance x from the bridge, then the distance from the (n+1)th fret to the bridge is x-(x/17.817).[15] Frets are available in several different gauges and can be fitted according to player preference. Among these are "jumbo" frets, which have much thicker gauge, allowing for use of a slight vibrato technique from pushing the string down harder and softer. "Scalloped" fretboards, where the wood of the fretboard itself is "scooped out" between the frets, allow a dramatic vibrato effect. Fine frets, much flatter, allow a very low string-action, but require that other conditions, such as curvature of the neck, be well-maintained to prevent buzz.
The original purpose of the resonator was to produce a very loud sound; this purpose has been largely superseded by electrical amplification, but the resonator guitar is still played because of its distinctive tone. Resonator guitars may have either one or three resonator cones. The method of transmitting sound resonance to the cone is either a "biscuit" bridge, made of a small piece of hardwood at the vertex of the cone (Nationals), or a "spider" bridge, made of metal and mounted around the rim of the (inverted) cone (Dobros). Three-cone resonators always use a specialized metal bridge. The type of resonator guitar with a neck with a square cross-section—called "square neck" or "Hawaiian"—is usually played face up, on the lap of the seated player, and often with a metal or glass slide. The round neck resonator guitars are normally played in the same fashion as other guitars, although slides are also often used, especially in blues.
The pickguard, also known as the scratchplate, is usually a piece of laminated plastic or other material that protects the finish of the top of the guitar from damage due to the use of a plectrum ("pick") or fingernails. Electric guitars sometimes mount pickups and electronics on the pickguard. It is a common feature on steel-string acoustic guitars. Some performance styles that use the guitar as a percussion instrument (tapping the top or sides between notes, etc.), such as flamenco, require that a scratchplate or pickguard be fitted to nylon-string instruments.
If you’re the type of parent who believes music can improve early childhood development, science has good news for you. A recent study suggests that guitar practice can help children better and faster process music and verbal language. Hearing different pitches and tones can help one better parse spoken words. So while every parent should remain careful not to forcefully involve their little ones in music, sports, and other interests, parents can still take a gentler approach that stimulates joy and curiosity, and plant a seed for lifelong learning.
The musical theory of chords is reviewed, to provide terminology for a discussion of guitar chords. Three kinds of chords, which are emphasized in introductions to guitar-playing,[10][11] are discussed. These basic chords arise in chord-triples that are conventional in Western music, triples that are called three-chord progressions. After each type of chord is introduced, its role in three-chord progressions is noted.
Solo, lead, and rhythm guitarists everywhere can now access the best selection of instantly downloadable digital sheet music and guitar tab on the internet. Put down the pick for just a moment and put your fingers to work browsing through Musicnotes.com's vast archives of guitar tabs ready to be enjoyed by musicians of all ages. Our collection features a weekly updated catalogue of some of guitars greatest compilations.
Solid body seven-string guitars were popularized in the 1980s and 1990s. Other artists go a step further, by using an eight-string guitar with two extra low strings. Although the most common seven-string has a low B string, Roger McGuinn (of The Byrds and Rickenbacker) uses an octave G string paired with the regular G string as on a 12-string guitar, allowing him to incorporate chiming 12-string elements in standard six-string playing. In 1982 Uli Jon Roth developed the "Sky Guitar", with a vastly extended number of frets, which was the first guitar to venture into the upper registers of the violin. Roth's seven-string and "Mighty Wing" guitar features a wider octave range.[citation needed]
Conventionally, guitarists double notes in a chord to increase its volume, an important technique for players without amplification; doubling notes and changing the order of notes also changes the timbre of chords. It can make a possible a "chord" which is composed of the all same note on different strings. Many chords can be played with the same notes in more than one place on the fretboard.
When you’re learning a new chord, make the shape and leave it on the guitar for about thirty seconds. Then remove your hand, shake it out, and make the chord shape again. It may take some time for you to make the chord shape again, but that’s okay because you’re working on your muscle memory. Repeating this process a few times is a great way of memorizing your chords.
Though they may not be as exciting of a topic as instruments or amplifiers, choosing the right type of strings for your guitar is incredibly important. Guitar strings have different responses and different feels, and when the right type of string is used it’s a huge asset to your playing. Likewise, when the wrong type of string is used it can be incredibly detrimental.
I think for all parties, if we had the ability to send a "two day backstage pass" (you can use that), where we can send a friend a link and they could try the sight for free but couldn't submit videos. I have a few friends that I keep trying to sell them on but they just are not totally sold and I think it's because the beauty of this site is the personalized VE's are. The interaction between student and teacher is what really makes this magical and it's really hard to describe. The search feature could be a little better, more precise and sometimes it finds no VE hits on simple searches like street. Otherwise I am one of your biggest fans.
All-fourths tuning replaces the major third between the third and second strings with a fourth, extending the conventional tuning of a bass guitar. With all-fourths tuning, playing the triads is more difficult, but improvisation is simplified, because chord-patterns remain constant when moved around the fretboard. Jazz guitarist Stanley Jordan uses the all-fourths tuning EADGCF. Invariant chord-shapes are an advantage of other regular tunings, such as major-thirds and all-fifths tunings.[20]
Body size, shape and style has changed over time. 19th century guitars, now known as salon guitars, were smaller than modern instruments. Differing patterns of internal bracing have been used over time by luthiers. Torres, Hauser, Ramirez, Fleta, and C. F. Martin were among the most influential designers of their time. Bracing not only strengthens the top against potential collapse due to the stress exerted by the tensioned strings, but also affects the resonance characteristics of the top. The back and sides are made out of a variety of timbers such as mahogany, Indian rosewood and highly regarded Brazilian rosewood (Dalbergia nigra). Each one is primarily chosen for their aesthetic effect and can be decorated with inlays and purfling.

Through School of Rock's private guitar lessons and group rehearsals, children learn to play the guitar and eventually perform the songs they love in a fun, supportive and comfortable atmosphere. Based on the student's age and skill level, guitar lessons for kids are part of every School of Rock music program including Rookies, Rock 101, Performance, House Band, and AllStars.
You don't have to be a virtuoso guitarist to touch people's hearts with your music! Guitar teacher Samuel B. shares a few of his favorite great-but-not-that-great famous guitar players... Towards the end of Johnny Cash's autobiography, you'll find the following paragraph: As to my musical future, my prospects look good. I can whack on a guitar as incompetently as I could a year ago, probably more so. I can sing just as well, or as badly, as I ever could. And I've got more songs trying to
As already stated, the perfect-fifths (P5) interval is the most harmonious, after the unison and octave intervals. An explanation of human perception of harmony relates the mechanics of a vibrating string to the musical acoustics of sound waves using the harmonic analysis of Fourier series. When a string is struck with a finger or pick (plectrum), it vibrates according to its harmonic series. When an open-note C-string is struck, its harmonic series begins with the terms (C,C,G,C,E,G,B♭,C). The root note is associated with a sequence of intervals, beginning with the unison interval (C,C), the octave interval (C,C), the perfect fifth (C,G), the perfect fourth (G,C), and the major third (C,E). In particular, this sequence of intervals contains the thirds of the C-major chord {(C,E),(E,G)}.[4]


Justin is an instructor with that rare combination that encompasses great playing in conjunction with a thoughtful, likable personality. Justin's instruction is extremely intelligent because he's smart enough to know the 'basics' don't have to be served 'raw' - Justin keenly serves the information covered in chocolate. Justin's site is like a free pass in a candy store!


The types and models of pickups used can greatly affect the tone of the guitar. Typically, humbuckers, which are two magnet-coil assemblies attached to each other, are traditionally associated with a heavier sound. Single-coil pickups, one magnet wrapped in copper wire, are used by guitarists seeking a brighter, twangier sound with greater dynamic range.