In acoustic guitars, string vibration is transmitted through the bridge and saddle to the body via sound board. The sound board is typically made of tone woods such as spruce or cedar. Timbers for tone woods are chosen for both strength and ability to transfer mechanical energy from the strings to the air within the guitar body. Sound is further shaped by the characteristics of the guitar body's resonant cavity. In expensive instruments, the entire body is made of wood. In inexpensive instruments, the back may be made of plastic.
Solid body seven-string guitars were popularized in the 1980s and 1990s. Other artists go a step further, by using an eight-string guitar with two extra low strings. Although the most common seven-string has a low B string, Roger McGuinn (of The Byrds and Rickenbacker) uses an octave G string paired with the regular G string as on a 12-string guitar, allowing him to incorporate chiming 12-string elements in standard six-string playing. In 1982 Uli Jon Roth developed the "Sky Guitar", with a vastly extended number of frets, which was the first guitar to venture into the upper registers of the violin. Roth's seven-string and "Mighty Wing" guitar features a wider octave range.[citation needed]
You can tell whether or not strings are of a thin or thick gauge based on the numbers on the package. The smallest number, which is the gauge of thinnest string, will usually be .9 or lower on thin gauge strings. On thick gauge strings this number will be .12 or higher. Strings that are .10 or .11 are generally considered to be “mediums”, and produce a tone and feel which is the middle ground between these two extremes.
The BMus in performance with a concentration in guitar is a program that focuses on the study of classical guitar literature and techniques. Goals include enabling students to express themselves musically while emphasizing the skills necessary to pursue careers as professional musicians. The course of study includes extensive performance experiences.

Electric guitars, introduced in the 1930s, use an amplifier and a loudspeaker that both makes the sound of the instrument loud enough for the performers and audience to hear, and, given that it produces an electric signal when played, that can electronically manipulate and shape the tone using an equalizer (e.g., bass and treble tone controls) and a huge variety of electronic effects units, the most commonly used ones being distortion (or "overdrive") and reverb. Early amplified guitars employed a hollow body, but a solid wood body was eventually found more suitable during the 1960s and 1970s, as it was less prone to unwanted acoustic feedback "howls". As with acoustic guitars, there are a number of types of electric guitars, including hollowbody guitars, archtop guitars (used in jazz guitar, blues and rockabilly) and solid-body guitars, which are widely used in rock music.


Unlike the piano, the guitar has the same notes on different strings. Consequently, guitar players often double notes in chord, so increasing the volume of sound. Doubled notes also changes the chordal timbre: Having different "string widths, tensions and tunings, the doubled notes reinforce each other, like the doubled strings of a twelve-string guitar add chorusing and depth".[38] Notes can be doubled at identical pitches or in different octaves. For triadic chords, doubling the third interval, which is either a major third or a minor third, clarifies whether the chord is major or minor.[39]
{"eVar4":"shop: accessories","eVar5":"shop: accessories: strings","pageName":"[mf] shop: accessories: strings: guitar strings","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: accessories: strings","prop1":"[mf] shop: accessories","evar51":"default: united states","prop10":"category","prop11":"guitar strings","prop5":"[mf] shop: accessories: strings: guitar strings","prop6":"[mf] shop: accessories: strings: guitar strings","prop3":"[mf] shop: accessories: strings: guitar strings","prop4":"[mf] shop: accessories: strings: guitar strings","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] sub category2"}
Solo, lead, and rhythm guitarists everywhere can now access the best selection of instantly downloadable digital sheet music and guitar tab on the internet. Put down the pick for just a moment and put your fingers to work browsing through Musicnotes.com's vast archives of guitar tabs ready to be enjoyed by musicians of all ages. Our collection features a weekly updated catalogue of some of guitars greatest compilations.
This month, HBO released a new documentary about Kurt Cobain's life called Montage of Heck. Unlike past documentaries on the legendary guitarist and singer, this one highlights his humanity and shares perhaps the most intimate look at his life that his fans have ever had.  Director Brett Morgan worked with Cobain's family, including his daughter Frances Bean Cobain, who provided home movies, photographs, and journals. At times funny and at other times deeply sad, Montage of Heck manages to gi
Archtop guitars are steel-string instruments in which the top (and often the back) of the instrument are carved, from a solid billet, into a curved, rather than a flat, shape. This violin-like construction is usually credited to the American Orville Gibson. Lloyd Loar of the Gibson Mandolin-Guitar Mfg. Co introduced the violin-inspired "F"-shaped hole design now usually associated with archtop guitars, after designing a style of mandolin of the same type. The typical archtop guitar has a large, deep, hollow body whose form is much like that of a mandolin or a violin-family instrument. Nowadays, most archtops are equipped with magnetic pickups, and they are therefore both acoustic and electric. F-hole archtop guitars were immediately adopted, upon their release, by both jazz and country musicians, and have remained particularly popular in jazz music, usually with flatwound strings.

Our Suzuki teachers are experienced in teaching CCM students as young as 3. Developed by the Japanese Violinist Shinichi Suzuki, the Suzuki method teaches music by ear before reading notes on the instrument so teachers can focus on setting up each student with correct posture and technique to ensure the student's continued success. Parental involvement is required for students under the age of 8 and before the child starts, parents are required to attend a private 3-week parent education class.
The top, back and ribs of an acoustic guitar body are very thin (1–2 mm), so a flexible piece of wood called lining is glued into the corners where the rib meets the top and back. This interior reinforcement provides 5 to 20 mm of solid gluing area for these corner joints. Solid linings are often used in classical guitars, while kerfed lining is most often found in steel string acoustics. Kerfed lining is also called kerfing because it is scored, or "kerfed"(incompletely sawn through), to allow it to bend with the shape of the rib). During final construction, a small section of the outside corners is carved or routed out and filled with binding material on the outside corners and decorative strips of material next to the binding, which are called purfling. This binding serves to seal off the end grain of the top and back. Purfling can also appear on the back of an acoustic guitar, marking the edge joints of the two or three sections of the back. Binding and purfling materials are generally made of either wood or plastic.
A guitar's frets, fretboard, tuners, headstock, and truss rod, all attached to a long wooden extension, collectively constitute its neck. The wood used to make the fretboard usually differs from the wood in the rest of the neck. The bending stress on the neck is considerable, particularly when heavier gauge strings are used (see Tuning), and the ability of the neck to resist bending (see Truss rod) is important to the guitar's ability to hold a constant pitch during tuning or when strings are fretted. The rigidity of the neck with respect to the body of the guitar is one determinant of a good instrument versus a poor-quality one.
To play a C chord on a guitar, put your ring finger on the third fret on the A string, your middle finger on the second fret on the D string, leave the G string open, and put your index finger on the first fret of the B string. Before you try to strum the chord, play each note individually until the note sounds clear. When you've mastered the C chord, try moving on to other chords like G or F.
The nut is a small strip of bone, plastic, brass, corian, graphite, stainless steel, or other medium-hard material, at the joint where the headstock meets the fretboard. Its grooves guide the strings onto the fretboard, giving consistent lateral string placement. It is one of the endpoints of the strings' vibrating length. It must be accurately cut, or it can contribute to tuning problems due to string slippage or string buzz. To reduce string friction in the nut, which can adversely affect tuning stability, some guitarists fit a roller nut. Some instruments use a zero fret just in front of the nut. In this case the nut is used only for lateral alignment of the strings, the string height and length being dictated by the zero fret.
Conventionally, guitarists double notes in a chord to increase its volume, an important technique for players without amplification; doubling notes and changing the order of notes also changes the timbre of chords. It can make a possible a "chord" which is composed of the all same note on different strings. Many chords can be played with the same notes in more than one place on the fretboard.
A few years back, I dusted off the ol' Takamine I got in high school to try some 'music therapy' with my disabled son, who was recovering from a massive at-birth stroke. This reignited my long dormant passion to transform myself from a beach strummer to a 'real' musician; however, as a single mom, taking in-person lessons was financially difficult. Then I found Justinguitar! Flash forward to today; my son is almost fully recovered (YAY!), my guitar collection has grown significantly, and I'm starting to play gigs. None of this would have been possible without your guidance and generosity, Justin. Thank you for being part of the journey!


The standard guitar has six strings, but four-, seven-, eight-, nine-, ten-, eleven-, twelve-, thirteen- and eighteen-string guitars are also available. Classical and flamenco guitars historically used gut strings, but these have been superseded by polymer materials, such as nylon and fluorocarbon. Modern guitar strings are constructed from metal, polymers, or animal or plant product materials. Instruments utilizing "steel" strings may have strings made from alloys incorporating steel, nickel or phosphor bronze. Bass strings for both instruments are wound rather than monofilament.
The nut is a small strip of bone, plastic, brass, corian, graphite, stainless steel, or other medium-hard material, at the joint where the headstock meets the fretboard. Its grooves guide the strings onto the fretboard, giving consistent lateral string placement. It is one of the endpoints of the strings' vibrating length. It must be accurately cut, or it can contribute to tuning problems due to string slippage or string buzz. To reduce string friction in the nut, which can adversely affect tuning stability, some guitarists fit a roller nut. Some instruments use a zero fret just in front of the nut. In this case the nut is used only for lateral alignment of the strings, the string height and length being dictated by the zero fret.


If you’re interested in playing lead guitar or performing guitar solos, you’ll want to check out the Lead Guitar Quick-Start Series. It’s a collection of 12 lessons that cover everything you need to know to start exploring lead guitar. You’ll learn basic picking technique, the major scale, the major pentatonic scale, the minor pentatonic scale, how to play a guitar solo, and much more.
At least two instruments called "guitars" were in use in Spain by 1200: the guitarra latina (Latin guitar) and the so-called guitarra morisca (Moorish guitar). The guitarra morisca had a rounded back, wide fingerboard, and several sound holes. The guitarra Latina had a single sound hole and a narrower neck. By the 14th century the qualifiers "moresca" or "morisca" and "latina" had been dropped, and these two cordophones were simply referred to as guitars.[8]
For the standard tuning, there is exactly one interval of a major third between the second and third strings, and all the other intervals are fourths. The irregularity has a price - chords cannot be shifted around the fretboard in the standard tuning E-A-D-G-B-E, which requires four chord-shapes for the major chords. There are separate chord-forms for chords having their root note on the third, fourth, fifth, and sixth strings.[19]
Once you know the basic chords, it might be easier to think of them the way the function inside a key. For example, when in the key of E, the E (I) is called the Tonic. It's what all the other chords want to get to—which is what helps give western music its sense of motion. The A (IV) in the key of E functions as the Subdominant—it's sort of a passive in-between, just as happy to continue forward, as to relax back to the Tonic. The Dominant is just what it sounds like: it leads you where it wants to go. In the key of E, that role is filled by the B (V), and will definitely make your brain want to get back to the Tonic! When you get more familiar with the chords, and want to sketch out a tune, try writing it as I-IV-V (or variations of that) instead of E-A-B. It will make it much easier to transpose when you find out your singer cannot sing in the original key!
This month, HBO released a new documentary about Kurt Cobain's life called Montage of Heck. Unlike past documentaries on the legendary guitarist and singer, this one highlights his humanity and shares perhaps the most intimate look at his life that his fans have ever had.  Director Brett Morgan worked with Cobain's family, including his daughter Frances Bean Cobain, who provided home movies, photographs, and journals. At times funny and at other times deeply sad, Montage of Heck manages to gi … Read More


The history of stringed instruments dates back thousands of years, while the modern guitar can be traced back to the oud and the lute of the 8th and 9th centuries. Today's guitars come in countless variations and at JustStrings.com, we have a dazzling variety of guitar strings and other types of strings for many different instruments. Advanced technology combined with traditional craftsmanship produces some of the finest strings that boast long-lasting durability and exceptional tonal quality. Whether you're looking for rugged, great-sounding electric guitar strings to take on tour with you, or the perfect set of strings for your lap steel, we're bound to have exactly what you need. We take great pride in bringing you the best quality strings from the world's leading innovators. Our acoustic guitar strings, from manufacturers like Ernie Ball, GHS, Thomastik-Infeld and Fender, are available in many varieties, from silver-plated copper flat wound to 80/20 bronze round-wound. You'll find plain uncoated strings and coated strings that improve longevity. Classical guitar strings, traditionally made from gut, are now strung with nylon or advanced synthetic materials for better performance. Electric guitar strings are available in nickel-plated steel, pure nickel or stainless steel. We also have strings for resophonic guitars (also known as Dobros), Steinberger guitars and pedal steel guitars. Browse our bass guitar strings, and find 7-string, 8-string or 12-string guitar strings. We also carry banjo strings, harp strings, and strings for octave, tenor, baritone and Renaissance guitars. We are the leading source of premium strings for nearly every type of instrument.
Open tuning refers to a guitar tuned so that strumming the open strings produces a chord, typically a major chord. The base chord consists of at least 3 notes and may include all the strings or a subset. The tuning is named for the open chord, Open D, open G, and open A are popular tunings. All similar chords in the chromatic scale can then be played by barring a single fret.[16] Open tunings are common in blues and folk music,[17] and they are used in the playing of slide and bottleneck guitars.[16][18] Many musicians use open tunings when playing slide guitar.[17]


I tried several times over the course of 20 years to learn guitar. I purchased guitars, amps, books, private lessons. Nothing ever stuck, until I found justinguitar.com. The only reason I can play guitar today is because of Justin. His courses are well thought out, easy to understand, easy to follow, and easy to make progress on. I can't think of a single product or service that I've ever used in my life that I could recommend more highly than justinguitar.com.
The original purpose of the resonator was to produce a very loud sound; this purpose has been largely superseded by electrical amplification, but the resonator guitar is still played because of its distinctive tone. Resonator guitars may have either one or three resonator cones. The method of transmitting sound resonance to the cone is either a "biscuit" bridge, made of a small piece of hardwood at the vertex of the cone (Nationals), or a "spider" bridge, made of metal and mounted around the rim of the (inverted) cone (Dobros). Three-cone resonators always use a specialized metal bridge. The type of resonator guitar with a neck with a square cross-section—called "square neck" or "Hawaiian"—is usually played face up, on the lap of the seated player, and often with a metal or glass slide. The round neck resonator guitars are normally played in the same fashion as other guitars, although slides are also often used, especially in blues.
Electric guitars, introduced in the 1930s, use an amplifier and a loudspeaker that both makes the sound of the instrument loud enough for the performers and audience to hear, and, given that it produces an electric signal when played, that can electronically manipulate and shape the tone using an equalizer (e.g., bass and treble tone controls) and a huge variety of electronic effects units, the most commonly used ones being distortion (or "overdrive") and reverb. Early amplified guitars employed a hollow body, but a solid wood body was eventually found more suitable during the 1960s and 1970s, as it was less prone to unwanted acoustic feedback "howls". As with acoustic guitars, there are a number of types of electric guitars, including hollowbody guitars, archtop guitars (used in jazz guitar, blues and rockabilly) and solid-body guitars, which are widely used in rock music.
Peterson, Jonathon (2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72 (Winter): 36–43. ISSN 1041-7176. Archived from the original on 21 October 2011. Retrieved 9 October 2012.

### Russell, George (2001) [1953]. "Chapter 1 The Lydian scale: The seminal source of the principal of tonal gravity". George Russell's Lydian chromatic concept of tonal organization. Volume One: The art and science of tonal gravity (Fourth (Second printing, corrected, 2008) ed.). Brookline, Massachusetts: Concept Publishing Company. pp. 1–9. ISBN 0-9703739-0-2.

A guitar's frets, fretboard, tuners, headstock, and truss rod, all attached to a long wooden extension, collectively constitute its neck. The wood used to make the fretboard usually differs from the wood in the rest of the neck. The bending stress on the neck is considerable, particularly when heavier gauge strings are used (see Tuning), and the ability of the neck to resist bending (see Truss rod) is important to the guitar's ability to hold a constant pitch during tuning or when strings are fretted. The rigidity of the neck with respect to the body of the guitar is one determinant of a good instrument versus a poor-quality one.
School of Rock's highly-trained guitar instructors are experts when it comes to inspiring teens to learn to play the guitar like a pro. Our proven formula for learning to play the guitar effectively and quickly starts with private guitar lessons plus group rehearsals in a safe and friendly environment. All teens are enrolled in or audition for one of the following programs: Rock 101, Performance, House Band, and AllStars.
My personal opinion on the topic, as one musician to another, is that the best thing you can possibly do when trying to figure out which string to go with is to try out as many different brands and types of guitar strings as you can. Strings are cheap enough that most people are going to be able to afford to experiment, and the truth of the matter is that you’re probably not going to really know what works best for you until you have hands on experience.
We believe that Guitar practice as an adult is more productive than it seems because it clears your head, it builds patience, discipline and concentration skills which you can transfer over to other parts of life, and it keeps your hand-eye coordination sharp. It also keeps you committed to learning and improvement, which again, are transferable traits to professional life. As role models, parents taking active classes shows kids the importance of pursuing personal interests for life.


Archtop guitars are steel-string instruments in which the top (and often the back) of the instrument are carved, from a solid billet, into a curved, rather than a flat, shape. This violin-like construction is usually credited to the American Orville Gibson. Lloyd Loar of the Gibson Mandolin-Guitar Mfg. Co introduced the violin-inspired "F"-shaped hole design now usually associated with archtop guitars, after designing a style of mandolin of the same type. The typical archtop guitar has a large, deep, hollow body whose form is much like that of a mandolin or a violin-family instrument. Nowadays, most archtops are equipped with magnetic pickups, and they are therefore both acoustic and electric. F-hole archtop guitars were immediately adopted, upon their release, by both jazz and country musicians, and have remained particularly popular in jazz music, usually with flatwound strings.
If you are starting or just stuck in rut, this is the site for you. I had been playing three years and was not advancing as I wanted to, then I saw an ad for Paul Gilbert lessons at Artistworks. I decided to check it out and I have to say, if I had this from the beginning, I would be a much better guitarist. The main reason why, is that Paul is known for his fast playing, but he focuses you on rhythm to start off. That is were I had lacked. I thought I was a decent rhythm player, but I was not. So much thanks to Artistworks and Paul for the great site.
You can tell whether or not strings are of a thin or thick gauge based on the numbers on the package. The smallest number, which is the gauge of thinnest string, will usually be .9 or lower on thin gauge strings. On thick gauge strings this number will be .12 or higher. Strings that are .10 or .11 are generally considered to be “mediums”, and produce a tone and feel which is the middle ground between these two extremes.
I think for all parties, if we had the ability to send a "two day backstage pass" (you can use that), where we can send a friend a link and they could try the sight for free but couldn't submit videos. I have a few friends that I keep trying to sell them on but they just are not totally sold and I think it's because the beauty of this site is the personalized VE's are. The interaction between student and teacher is what really makes this magical and it's really hard to describe. The search feature could be a little better, more precise and sometimes it finds no VE hits on simple searches like street. Otherwise I am one of your biggest fans.
Justin, first off I just wanted to say thanks for all the advice and instruction. You make playing guitar easy and understandable and fun. You explain very well the hows and whys when presenting a new song to learn and walk it through so that anyone can learn. I have played guitar for 20 years now and have learned more from you in the last five years than the previous 15 by myself. You have also been a tremendous help to both my son and my daughter in learning to play as well by making playing fun and interesting. I have a couple of pictures of me and my children all doing what we love. Many Thanks to you Justin

# To play a C chord on a guitar, put your ring finger on the third fret on the A string, your middle finger on the second fret on the D string, leave the G string open, and put your index finger on the first fret of the B string. Before you try to strum the chord, play each note individually until the note sounds clear. When you've mastered the C chord, try moving on to other chords like G or F.

Repetitive open-tunings are used for two non-Spanish classical-guitars. For the English guitar the open chord is C major (C-E-G-C-E-G);[67] for the Russian guitar which has seven strings, G major (G-B-D-G-B-D-G).[68] Mixing a perfect fourth and a minor third along with a major third, these tunings are on-average major-thirds regular-tunings. While on-average major-thirds tunings are conventional open tunings, properly major-thirds tunings are unconventional open-tunings, because they have augmented triads as their open chords.[69]
For example, if the note E (the open sixth string) is played over the A minor chord, then the chord would be [0 0 2 2 1 0]. This has the note E as its lowest tone instead of A. It is often written as Am/E, where the letter following the slash indicates the new bass note. However, in popular music it is usual to play inverted chords on the guitar when they are not part of the harmony, since the bass guitar can play the root pitch.
The ratio of the spacing of two consecutive frets is {\displaystyle {\sqrt[{12}]{2}}}  (twelfth root of two). In practice, luthiers determine fret positions using the constant 17.817—an approximation to 1/(1-1/ {\displaystyle {\sqrt[{12}]{2}}} ). If the nth fret is a distance x from the bridge, then the distance from the (n+1)th fret to the bridge is x-(x/17.817).[15] Frets are available in several different gauges and can be fitted according to player preference. Among these are "jumbo" frets, which have much thicker gauge, allowing for use of a slight vibrato technique from pushing the string down harder and softer. "Scalloped" fretboards, where the wood of the fretboard itself is "scooped out" between the frets, allow a dramatic vibrato effect. Fine frets, much flatter, allow a very low string-action, but require that other conditions, such as curvature of the neck, be well-maintained to prevent buzz.


I've given this guitar chord book away as a gift and purchased one for myself. I love the spiral bound binding and I'm sure all but the best guitar players will not run out of chords to learn in this little book. I highly recommend this book to learn guitar chords. It's not a book that teaches you how to play a guitar. It is mostly chords but this is a crucial part of learning to play, right?

# Once you've got your categories narrowed down, then you can start getting into the nitty-gritty differences between strings. For instance, electric guitars will give you the choice between nickel (for authentic vintage sound) and stainless steel (for maximum durability). Some string manufacturers have exotic material options with their own unique characteristics, like Ernie Ball's Slinky Cobalt strings. With so many subtle differences separating guitar strings, you owe it to yourself to browse carefully and look at all the choices on the table before making a decision.

We were privileged to have worked with hundreds of top artists and educators who authored the original magazine articles and then recorded audio lessons in their own studios. While video is the medium of choice today, these 1,200+ audio lessons still deliver amazing instruction from some of the best in the biz — perfect for those long drives and commutes!
On the other hand, some chords are more difficult to play in a regular tuning than in standard tuning. It can be difficult to play conventional chords especially in augmented-fourths tuning and all-fifths tuning,[20] in which the large spacings require hand stretching. Some chords, which are conventional in folk music, are difficult to play even in all-fourths and major-thirds tunings, which do not require more hand-stretching than standard tuning.[21]


Jump up ^ This sequence of fifths features the diminished fifth (b,f), which replaces the perfect fifth (b,f♯) containing the chromatic note f♯, which is not a member of the C-major key. The note f (of the C-major scale) is replaced by the note f♯ in the Lydian chromatic scale (Russell, "The fundamental harmonic structure of the Lydian scale", Example 1:7, "The C Lydian scale", p. 5).
With so many options available in the world today, buying a guitar that perfectly represents your own style, tastes, and attitude has never been easier. Whether you're a classical guitarist looking for that perfectly balanced nylon flamenco, or a hard rock enthusiast who needs Pete Townshend crunch combined with Jack White power, there is simply no shortage of axes to choose from.

{"eVar4":"shop: accessories","eVar5":"shop: accessories: strings","pageName":"[gc] shop: accessories: strings: guitar strings","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: accessories: strings","prop1":"[gc] shop: accessories","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitar strings","prop5":"[gc] shop: accessories: strings: guitar strings","prop6":"[gc] shop: accessories: strings: guitar strings","prop3":"[gc] shop: accessories: strings: guitar strings","prop4":"[gc] shop: accessories: strings: guitar strings","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category2"}

Most electric guitar bodies are made of wood and include a plastic pick guard. Boards wide enough to use as a solid body are very expensive due to the worldwide depletion of hardwood stock since the 1970s, so the wood is rarely one solid piece. Most bodies are made from two pieces of wood with some of them including a seam running down the center line of the body. The most common woods used for electric guitar body construction include maple, basswood, ash, poplar, alder, and mahogany. Many bodies consist of good-sounding, but inexpensive woods, like ash, with a "top", or thin layer of another, more attractive wood (such as maple with a natural "flame" pattern) glued to the top of the basic wood. Guitars constructed like this are often called "flame tops". The body is usually carved or routed to accept the other elements, such as the bridge, pickup, neck, and other electronic components. Most electrics have a polyurethane or nitrocellulose lacquer finish. Other alternative materials to wood are used in guitar body construction. Some of these include carbon composites, plastic material, such as polycarbonate, and aluminum alloys.
Of course, there are a few ways to narrow down the string options. For starters, since guitars come in different scales, you need a set that's the right length for your instrument. You also need to match the type of guitar: electric strings for an electric guitar, acoustic strings for acoustic. If you play an acoustic-electric, you'll usually be looking for acoustic strings since those instruments use non-magnetic pickups. For classical and Latin guitar types directly descended from ancient gut-stringed instruments, the right strings are generally going to be nylon.
The guitar is a type of chordophone, traditionally constructed from wood and strung with either gut, nylon or steel strings and distinguished from other chordophones by its construction and tuning. The modern guitar was preceded by the gittern, the vihuela, the four-course Renaissance guitar, and the five-course baroque guitar, all of which contributed to the development of the modern six-string instrument.